Using Si5324 as a clock generator on virtex-7 board

• verilog-i2c

  1 409 10.0 Verilog

  Verilog I2C interface for FPGA implementation

  For that part I think you need to use the software from silicon labs (might be skyworks now) to generate the stuff you need to write to the registers. Then, you can use something like https://github.com/alexforencich/verilog-i2c/blob/master/rtl/i2c_init.v. See https://github.com/alexforencich/verilog-ethernet/tree/master/example/HTG9200/fpga_10g for an example that targets the Si5341 specifically.

• verilog-ethernet

  6 1,723 0.0 Verilog

  Verilog Ethernet components for FPGA implementation

  For that part I think you need to use the software from silicon labs (might be skyworks now) to generate the stuff you need to write to the registers. Then, you can use something like https://github.com/alexforencich/verilog-i2c/blob/master/rtl/i2c_init.v. See https://github.com/alexforencich/verilog-ethernet/tree/master/example/HTG9200/fpga_10g for an example that targets the Si5341 specifically.

• Onboard AI

  getonboard.dev

  sponsored

  Learn any GitHub repo in 59 seconds. Onboard AI learns any GitHub repo in minutes and lets you chat with it to locate functionality, understand different parts, and generate new code. Use it for free at www.getonboard.dev.

  

Suggest a related project