nbfc VS clevo-indicator

The only other thing I can think of is https://github.com/hirschmann/nbfc

Try Notebook FanControl. There's a config profile for GL702VM included.

Non tinkerer answer: no Otherwise: Maybe, specially if you are a programmer, take a look at this project https://github.com/determ1ne/OmenHubLight (it supposedly supports four zones rgb and fan control), or this one https://github.com/alou-S/omen-fan which is for linux, but should give you an idea of what has to be done and maybe port it to windows using ec-probe utility from https://github.com/hirschmann/nbfc, and last but not least the hp-wmi linux driver https://github.com/torvalds/linux/blob/master/drivers/platform/x86/hp/hp-wmi.c which has some of the gaming hub features ported.

As a person that still uses Linux on my laptop (its an old gaming laptop I use as a server) I know your pain about fan control, on windows you have many functional fancontrol software but on Linux it's crickets I did find this utility that worked for my laptop but it took over 3 hours for me to figure out how it worked and properly configure it for my specific gaming laptop

There are hacky ways like NBFC here: https://github.com/hirschmann/nbfc This tool works by writing embedded controller registers directly. This can work for some laptops but has its own danger to it.

To depress just yet, fortunately, there is a very nice, open-source windows tool that can be used to control a laptop fans: NOTEBOOK FAN CONTROL

You have access to the fan curves only thru Armoury Crate's manual mode . I haven't personally tried this but there was an app called "notebook fan control", it might be helpful . I used to run it on my GL502VY laptop back in the day where it was kinda impossible to change the fan speeds. You can find it on github

Neato, I'll try it out. I use dbeniamine's fork of Clevo Indicator to allow the CPU fan to max out to 100% while I'm building Firefox, Thunderbird or Chromium.

The only thing I've found that works is dbeniamine's fork of Clevo Indicator. I don't like the fan curve as much on the Auto setting as it ramps up and down too much and is a lot louder. However, it does have manual speed control as well. Keep in mind it overrides the system fan control so you'll have to reboot if you want to switch back to normal.

Oh by the way, this fork has more updated code and works better for me: https://github.com/dbeniamine/clevo-indicator