nbfc VS nbfc-linux

The only other thing I can think of is https://github.com/hirschmann/nbfc

Try Notebook FanControl. There's a config profile for GL702VM included.

Non tinkerer answer: no Otherwise: Maybe, specially if you are a programmer, take a look at this project https://github.com/determ1ne/OmenHubLight (it supposedly supports four zones rgb and fan control), or this one https://github.com/alou-S/omen-fan which is for linux, but should give you an idea of what has to be done and maybe port it to windows using ec-probe utility from https://github.com/hirschmann/nbfc, and last but not least the hp-wmi linux driver https://github.com/torvalds/linux/blob/master/drivers/platform/x86/hp/hp-wmi.c which has some of the gaming hub features ported.

As a person that still uses Linux on my laptop (its an old gaming laptop I use as a server) I know your pain about fan control, on windows you have many functional fancontrol software but on Linux it's crickets I did find this utility that worked for my laptop but it took over 3 hours for me to figure out how it worked and properly configure it for my specific gaming laptop

There are hacky ways like NBFC here: https://github.com/hirschmann/nbfc This tool works by writing embedded controller registers directly. This can work for some laptops but has its own danger to it.

To depress just yet, fortunately, there is a very nice, open-source windows tool that can be used to control a laptop fans: NOTEBOOK FAN CONTROL

You have access to the fan curves only thru Armoury Crate's manual mode . I haven't personally tried this but there was an app called "notebook fan control", it might be helpful . I used to run it on my GL502VY laptop back in the day where it was kinda impossible to change the fan speeds. You can find it on github

Does this work for every laptop, or just tuxedos? I'm currently using nbfc linux

For laptops there's nbfc or its rewrite nbfc-linux.

https://github.com/nbfc-linux/nbfc-linux, it's serving me well

Obviously replace Your Laptop Model with your actual laptop model, from this list https://github.com/nbfc-linux/nbfc-linux/tree/main/share/nbfc/configs

https://github.com/hirschmann/nbfc I've used this in the past. The only part I don't like is it uses Mono, although it worked fine for me. There is also a linux port for this : https://github.com/nbfc-linux/nbfc-linux, but I'm having trouble with it.

sorry I'm not much of a hardware guy at all, so that lspci output is kind of alien to me... could the Serial Controller have anything to do with the fan...? btw, I forgot to mention that while I cannot get the fan speed in rpm, I could control it with nbfc-linux by using the pre-made profile for either the 8460p or 8460w iirc, on Artix Linux. Fairly recently made a clean install of Mint, though. Thanks for your help!

git clone https://github.com/nbfc-linux/nbfc-linux.git cd nbfc-linux make && sudo make install

Exactly! I use config for Acer Predator G3-572. If that won't work just try some Acer configs it shoud work. Here's the github repo for nbfc-linux: https://github.com/nbfc-linux/nbfc-linux