Voron-Afterburner VS WLED

On the GitHub you can browse previous releases. The Afterburner is in its own repository: https://github.com/VoronDesign/Voron-Afterburner

But my printhead front keeps deforming near the heatblock (part cooling air nozzle).

Repo: https://github.com/vorondesign/voron-afterburner

go straight for the Stealthburner toolhead instead of Afterburner, my guess is SB will become the stock setup soon anyway.

Thanks for the info but I did not managed to find help in those documents related to my issue. There was a identical problem described here https://github.com/VoronDesign/Voron-Afterburner/issues/6 and it was rejected although there are more users with the same issue

No, the printer is not the extruder. Printer HAS extruder with gears from bondtech. And no, mk3s has the same problem as other printers with direct dual gears extruder. Ofc if mk3s is a most used printer, most people will have problems with mk3s. For example voron has the same issue https://github.com/VoronDesign/Voron-Afterburner/issues/6

You can still use existing bowden adapter instead of Clockwork https://github.com/VoronDesign/Voron-Afterburner/tree/afterburner/STLs/Bowden Stealthburner is just the fan assembly and a hotend mount.

Also in this case I link you a video presentation: https://youtu.be/lmJkIXW5tXc And the page with the resources: https://github.com/VoronDesign/Voron-Afterburner In this case the assembly instructions are not there because there is a chapter about it in the assembly manuals of all the different voron printers. Like if you look at the one here, at page 72 of the manual you will find the instructions specifically for the afterburner and you can ignore the rest: https://vorondesign.com/voron_switchwire

I think you're one of todays lucky 10000 [0] learning about WLED [1] today :)

[0] https://xkcd.com/1053/

[1] https://kno.wled.ge/

I’ll do you one better: Here is the WLED main site - they cover everything - however you want it for your vehicle is up to you! (If you want to see a truck I personally worked (with 2 other main guys doing the woodwork and wiring) on that was probably the “most expensive” project with these controllers, check out the SEMA entered “Realtree Stormtrooper truck” - a LOT of time went in to that and almost a year of prep, not a fan myself, but custom electronics are what I like doing)

Did you use the esp32.bin? If so, you should instead use ESP32-C3 here: https://github.com/Aircoookie/WLED/releases/download/v0.14.0/WLED_0.14.0_ESP32-C3.bin

Friend replaced all his govee cintrollers with WLED.

Multiple WLED controllers

I feel like I should start this post with a disclaimer. I tend to over-complicate things. Which means I'm making this post partly as a sanity check and partly to fill in some gaps in my kno.wled.ge

Look at WLED.