Sovol-SV06-firmware VS everything-sovol-sv06

I followed this guide, skipped the installation step as the screen already comes with a Klipper installation. Removed everything inside /home/mks/printer_data/config and pulled the repo as instructed, but:

Anyone run into this? I sent an email to Sovol, waiting on a response, thought I'd ask here too to see if anyones run into this? Are the bed dimensions stored in the firmware somehow? Sorry not familiar with how this all works yet, wondering if I should try flashing this firmware https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus

Did the install via https://github.com/bassamanator/Sovol-SV06-firmware and i am using the PrusaSlicer profiles from there.

I'm using a sovol sv06 plus converted to klipper with the files here https://github.com/bassamanator/Sovol-SV06-firmware

One-Stop-Shop Klipper Configuration

I tried to install klipper using this guide, but I used the releases page instead of downloading the tree for the SV06 plus, so I accidentally put sv06 firmware on my sv06 plus

Well the OSS currently supports any printer actually, so technically speaking, you can go ahead and install the OSS for your printer.

My friend, your machine can't handle those speeds. Here are some of my prints: https://github.com/bassamanator/everything-sovol-sv06/blob/39477b317da7dac40efbb3a844a3fb36dead922d/images/prints/README.md. You can try to reduce the `max print speed`, start off by limiting it to 60-70mm/s (match the other profile's speed). I hope you've made other adjustments to the `printer settings` as well so that it works with marlin.

You can get a raspberry pi zero 2 w for $15 bucks from any of the authorized retailers. I just bought one the other day for a mobile retropi I’m putting together. They have them in stock now. I run it on a pi 4 but I’ve read about a bunch of people here on Reddit who run klipper on a pi zero and have no issues. klipper install guide. This guide is pretty good for walking you through the setup process.

https://github.com/bassamanator/everything-sovol-sv06 SV06 here, might browse a bit for the 01 Pro.

You'll find the essentials here.

There is this site someone else in the community made https://sv06.blakadder.com/ and there is also the klipper github repo https://github.com/bassamanator/Sovol-SV06-firmware. The same user of the klipper repo also maintains a parts repo too https://github.com/bassamanator/everything-sovol-sv06 but the site also seems to have the same info

You can find specs here: https://github.com/bassamanator/everything-sovol-sv06

If you are not a tinkerer, I would suggest you get rid of this printer, because it will act as a thorn in your sides. On the other hand, if this is truly your hobby, you can expect to get prints such as these. I'll put up my sub $300 SV06 with severe x-twist against a more than $1000 MK4 any day!

great resource for info on sv06

Designing this part? You can find the link to the official CAD models for this printer at the bottom of this repo, might help the design process.