everything-sovol-sv06 VS OctoPrint

My friend, your machine can't handle those speeds. Here are some of my prints: https://github.com/bassamanator/everything-sovol-sv06/blob/39477b317da7dac40efbb3a844a3fb36dead922d/images/prints/README.md. You can try to reduce the `max print speed`, start off by limiting it to 60-70mm/s (match the other profile's speed). I hope you've made other adjustments to the `printer settings` as well so that it works with marlin.

You can get a raspberry pi zero 2 w for $15 bucks from any of the authorized retailers. I just bought one the other day for a mobile retropi I’m putting together. They have them in stock now. I run it on a pi 4 but I’ve read about a bunch of people here on Reddit who run klipper on a pi zero and have no issues. klipper install guide. This guide is pretty good for walking you through the setup process.

https://github.com/bassamanator/everything-sovol-sv06 SV06 here, might browse a bit for the 01 Pro.

You'll find the essentials here.

There is this site someone else in the community made https://sv06.blakadder.com/ and there is also the klipper github repo https://github.com/bassamanator/Sovol-SV06-firmware. The same user of the klipper repo also maintains a parts repo too https://github.com/bassamanator/everything-sovol-sv06 but the site also seems to have the same info

You can find specs here: https://github.com/bassamanator/everything-sovol-sv06

If you are not a tinkerer, I would suggest you get rid of this printer, because it will act as a thorn in your sides. On the other hand, if this is truly your hobby, you can expect to get prints such as these. I'll put up my sub $300 SV06 with severe x-twist against a more than $1000 MK4 any day!

great resource for info on sv06

Designing this part? You can find the link to the official CAD models for this printer at the bottom of this repo, might help the design process.

The cheapest way is to use OctoPrint. Octoprint itself is free, and although it's often run on a Raspberry Pi, it can be installed on many things, such as an old laptop runing Linux or even Windows, or a small single-board computer. OctoPrint would connect to the printer using a USB cable, and you'd send the slicer output to Octoprint over your WiFi.

Octoprint

2023-11-08 14:10:57,263 - octoprint.util.connectivity.connectivity_checker - INF O - Resolving octoprint.org is working

- Two LibreELEC (https://libreelec.tv/) mediaplayers in house (yes, one is not enough in my big family).

- One for hosting low usage applications at home network (Unifi controller and some more).

- Octoprint (https://octoprint.org) connected to the 3d-printer.

- One on my desk for hardware hacking – mostly as just a PC with GPIO.

- Some Raspberry Pi Zeros as security cameras.

Really quite easy, especially if you have ever dealt with a raspberry pi before. Once installed & set up, you manage everything over a web interface. I even added a webcam to it in order to see what's going on. Check out https://octoprint.org/

For other devices it can be harder, there are guides for installing on Linux on the octoprint website (I use an old laptop running Linux Mint). If using an old Android phone look for Octo4A.

I’d just get Octoprint setup and a camera for it