everything-sovol-sv06 VS AM8-Switchwire-Mod

My friend, your machine can't handle those speeds. Here are some of my prints: https://github.com/bassamanator/everything-sovol-sv06/blob/39477b317da7dac40efbb3a844a3fb36dead922d/images/prints/README.md. You can try to reduce the `max print speed`, start off by limiting it to 60-70mm/s (match the other profile's speed). I hope you've made other adjustments to the `printer settings` as well so that it works with marlin.

You can get a raspberry pi zero 2 w for $15 bucks from any of the authorized retailers. I just bought one the other day for a mobile retropi I’m putting together. They have them in stock now. I run it on a pi 4 but I’ve read about a bunch of people here on Reddit who run klipper on a pi zero and have no issues. klipper install guide. This guide is pretty good for walking you through the setup process.

https://github.com/bassamanator/everything-sovol-sv06 SV06 here, might browse a bit for the 01 Pro.

You'll find the essentials here.

There is this site someone else in the community made https://sv06.blakadder.com/ and there is also the klipper github repo https://github.com/bassamanator/Sovol-SV06-firmware. The same user of the klipper repo also maintains a parts repo too https://github.com/bassamanator/everything-sovol-sv06 but the site also seems to have the same info

You can find specs here: https://github.com/bassamanator/everything-sovol-sv06

If you are not a tinkerer, I would suggest you get rid of this printer, because it will act as a thorn in your sides. On the other hand, if this is truly your hobby, you can expect to get prints such as these. I'll put up my sub $300 SV06 with severe x-twist against a more than $1000 MK4 any day!

great resource for info on sv06

Designing this part? You can find the link to the official CAD models for this printer at the bottom of this repo, might help the design process.

Not and answer to your question, but maybe still interesting for you: I created a Switchwire Mod for the AM8 (A8 with aluminum extrusion frame): https://github.com/maximilian-foerg/AM8-Switchwire-Mod

If you're converting your printer to an AM8, you may also want to take a look at the AM8 Switchwire Mod first. Especially since you already have a SKR Mini E3 and a V6 hotend, the mod would make sense.

How about going even a step further and building the AM8 Switchwire Mod? It also has a full config for the SKR mini E3 v2. In general, the SKR mini boards are great and a worthy upgrade over the stock Anet Board. I‘d highly recommend to combine it with a Raspberry Zero 2 WH and Klipper and Mainsail.

I'm currently designing a Core XZ upgrade for the popular Anet A8 printer/AM8 printer frame. I call it AM8 plus, and it was inspired by the Voron Switchwire. The project ist open source and available on GitHub (https://github.com/maximilian-foerg/AM8-plus-Switchwire), but it is still under development! In the video you can see a first working prototype. Release of v1.0 will be very soon, probably this month. It will be released on GitHub and thingiverse.