Sovol-SV06-firmware VS Ellis-SuperSlicer-Profiles

I followed this guide, skipped the installation step as the screen already comes with a Klipper installation. Removed everything inside /home/mks/printer_data/config and pulled the repo as instructed, but:

Anyone run into this? I sent an email to Sovol, waiting on a response, thought I'd ask here too to see if anyones run into this? Are the bed dimensions stored in the firmware somehow? Sorry not familiar with how this all works yet, wondering if I should try flashing this firmware https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus

Did the install via https://github.com/bassamanator/Sovol-SV06-firmware and i am using the PrusaSlicer profiles from there.

I'm using a sovol sv06 plus converted to klipper with the files here https://github.com/bassamanator/Sovol-SV06-firmware

One-Stop-Shop Klipper Configuration

I tried to install klipper using this guide, but I used the releases page instead of downloading the tree for the SV06 plus, so I accidentally put sv06 firmware on my sv06 plus

Well the OSS currently supports any printer actually, so technically speaking, you can go ahead and install the OSS for your printer.

It would help to do a comparison. Another thing you can try it to use already excellent print settings, find them here: https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles.

You might want to try printing at 250 and see how that works for you. To me that looks like not enough heat and layers are not bonding as it's happening across layers. 120-130mm/s should be good on a Revo, it can flow around 11mm3/s, I had one on my 2.4, and I printed at 130mm/s. Do you have the parts cooling fan off or on? If on, what speeds? On my 2.4 I hold 58-60°C chamber temps and the prints look like crap with no fan. I run a max of 35% on ABS prints, it's off until layer 5. Check out Ellis's SuperSlicer profiles, I used the Revo one.as a base and modded as needed. https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles

Give Ellis super slicer profile a chance if you havent already. I was having great prints with that. https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles

What nozzle are you running on your Revo? Is that a .6 brass nozzle or obXidian? Do you have .6 nozzle profile in your SuperSlicer? 270 is high for ABS, I print ABS all day in my 0.2 at 250° nozzle 110° bed temps. I know you posted you followed Ellis' tuning guide but are you using one of his SuperSlicer profiles? https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles I run the one he has listed for V6/Revo on my Revo. But I believe these are tuned for .4 nozzles. His profiles are a great starting point.

I have a Dragonfly BMO on my Voron 0. I'm running the Ellis Standard Flow 15mm3/s SuperSlicer profile on it. Max speed is 200mm/s and volumetric flow is set to 15mm3/s. I have tweaked/adjusted it to work with my printer and filament. I have not had very good luck with Cura on my Vorons, I use SuperSlicer, but I know others that only use Cura and it works great for them. https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles

Not a bad beginning guide - however much of this is cover with the default PIF profiles they publish. I had to do very minor tweaking to those to get excellent prints.

The first thing I recommend is using a proper print_settings profile. I recommend the ellis SuperSlicer print profile, there is nothing better anywhere in the 3d printing world https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles You can also download my SuperSlicer config bundle that contains the Ellis settings from here https://github.com/bassamanator/Sovol-SV06-firmware/tree/master/misc including the printer config. Warning, my config is setup for Klipper, unfortunately for your use case.

SuperSlicer config bundle that contains the printer configuration, as well as what are considered by many to be the best print settings available for any FDM printer. Find the differences between the different print setting profiles here. But basically, the 45 degree profile places the seam at the back.

I am using this SuperSlicer profile for high speed prints https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles