esp32-cnc VS WLED

Here's my KiBot config:

https://gitlab.com/stavros/esp32-cnc/-/blob/master/project.k...

It will automatically check your design and generate Gerbers and drill files for you. It will also generate a JLCPCB-compatible BOM that you can upload. All you need to do is add a field on each part called "JLC" in eeschema containing the LCSC part number.

For anyone who stumbles across this later, here's a KiBot project file that will automatically export the JLCPCB-compatible BOM/CPL file:

https://gitlab.com/stavros/esp32-cnc/-/blob/master/project.k...

It does this from a field on each part in the schematic called "JLC" containing the part number. The only thing I'm unsure of is whether the "footprint" column needs to be edited manually later, though.

I made a PCB for an ESP32 CNC controller, if anyone finds it useful:

https://gitlab.com/stavros/esp32-cnc

I think you're one of todays lucky 10000 [0] learning about WLED [1] today :)

[0] https://xkcd.com/1053/

[1] https://kno.wled.ge/

I’ll do you one better: Here is the WLED main site - they cover everything - however you want it for your vehicle is up to you! (If you want to see a truck I personally worked (with 2 other main guys doing the woodwork and wiring) on that was probably the “most expensive” project with these controllers, check out the SEMA entered “Realtree Stormtrooper truck” - a LOT of time went in to that and almost a year of prep, not a fan myself, but custom electronics are what I like doing)

Did you use the esp32.bin? If so, you should instead use ESP32-C3 here: https://github.com/Aircoookie/WLED/releases/download/v0.14.0/WLED_0.14.0_ESP32-C3.bin

Friend replaced all his govee cintrollers with WLED.

Multiple WLED controllers

I feel like I should start this post with a disclaimer. I tend to over-complicate things. Which means I'm making this post partly as a sanity check and partly to fill in some gaps in my kno.wled.ge

Look at WLED.