RTL8111_driver_for_OS_X VS VoodooI2C

Use this kext: https://github.com/Mieze/RTL8111_driver_for_OS_X

Have you tried RealtekRTL8111 ? Remember you'll also need to add the kext to your config.plist - refer to https://dortania.github.io/OpenCore-Install-Guide/ktext.html#ethernet for more info

Try thid one RealtekRTL8111 remove all netwrok related driver before , don't mix between them

RealtekRTL8111.kext

Hello, again again. I recently got help and finally installed MacOS on my AMD PC. But, I have a RX 6600 and RX 580, Big Sur is not compatible with the RX 6600, but Monterey is. So i tried to install Monterey. I was previously using the SmallTree kext for my Intel GBe NIC but it no longer works in Monterey. So how do I get the Killer E2500 NIC to work? I've tried the AtherosE2200Ethernet kext and RealtekRTL8111 kext, but both of them have not worked. So, does anyone know how to fix it? I would rather not use IntelIGB as it looks like it is unstable and I kinda need a stable connection. But if the Intel NIC can be fixed that would work too. Thank You!

Btw just found this repository, will this work?

I'm using Ethernet, but because the kext are not working I can install Big Sur. My motherboard is a Gigabyte A320M-S2H and I'm using RealtekRTL8111 (I've already tried older versions) and in the config.plist are enabled. Hope someone can help me.

As the guide states, "Atheros Killer E2500 models are actually Realtek based, for these systems please use RealtekRTL8111 instead." So replace AtherosE2200Ethernet.kext with RealtekRTL8111.kext.

For Ethernet port TEST this kext and see if working (https://github.com/Mieze/RTL8111_driver_for_OS_X) but, when I search for RTL8723BE, I see WiFi card ! please post your Exact System Config ...

This one and this

Are you sure your touchpad is only PS/2? (check here) You may also need VoodooRMI, VoodooSMBus, and/or VoodooI2C (and its plugins).

• VoodooI2C and VoodooI2CHID

Really helpful. I reviewed these and found one (#354) reported already with the exact same problem. Apparently it's not considered a bug, as ELAN gets priority over HID, and "you should need only one or the other." I'll dig a bit more before trying to submit a new issue or not.

Have a read over the VoodooI2C GitHub for more info: https://github.com/VoodooI2C/VoodooI2C

Did you try voodooi2c kext for trackpad. https://github.com/VoodooI2C/VoodooI2C/ Modern windows laptop usually have i2c touchpad. First find touchpad vendor then use voodooi2c kext,voodooi2chid kext if needed use voodooi2csynaptics kext for synaptics or voodooi2celan kext for elan touchpad and ssdt-xosi.aml. You can find prebuild ssdt-xosi.aml on opencore website on gathering files section. This way i fixed by trackpad with full guestures.

Trackpad: check the type via Windows Device Manger, if it’s SMBus then use VoodooRMI, if it’s I2C then use VoodooI2C (in both cases don’t forget to read the documentation)

Here is the guide i followed: https://github.com/VoodooI2C/VoodooI2C/blob/master/Documentation/Installation.md