RTL8111_driver_for_OS_X VS Wireless-USB-Big-Sur-Adapter

Use this kext: https://github.com/Mieze/RTL8111_driver_for_OS_X

Have you tried RealtekRTL8111 ? Remember you'll also need to add the kext to your config.plist - refer to https://dortania.github.io/OpenCore-Install-Guide/ktext.html#ethernet for more info

Try thid one RealtekRTL8111 remove all netwrok related driver before , don't mix between them

RealtekRTL8111.kext

Hello, again again. I recently got help and finally installed MacOS on my AMD PC. But, I have a RX 6600 and RX 580, Big Sur is not compatible with the RX 6600, but Monterey is. So i tried to install Monterey. I was previously using the SmallTree kext for my Intel GBe NIC but it no longer works in Monterey. So how do I get the Killer E2500 NIC to work? I've tried the AtherosE2200Ethernet kext and RealtekRTL8111 kext, but both of them have not worked. So, does anyone know how to fix it? I would rather not use IntelIGB as it looks like it is unstable and I kinda need a stable connection. But if the Intel NIC can be fixed that would work too. Thank You!

Btw just found this repository, will this work?

I'm using Ethernet, but because the kext are not working I can install Big Sur. My motherboard is a Gigabyte A320M-S2H and I'm using RealtekRTL8111 (I've already tried older versions) and in the config.plist are enabled. Hope someone can help me.

As the guide states, "Atheros Killer E2500 models are actually Realtek based, for these systems please use RealtekRTL8111 instead." So replace AtherosE2200Ethernet.kext with RealtekRTL8111.kext.

For Ethernet port TEST this kext and see if working (https://github.com/Mieze/RTL8111_driver_for_OS_X) but, when I search for RTL8723BE, I see WiFi card ! please post your Exact System Config ...

Perhaps this could be the solution to your problem. https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter .But in any case, I advise you to search the Internet for some information.

I have a tp-link archer t3u plus and I use this https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter

Your wifi card isn’t natively supported but if it happens to have a realtek chipset which is usually the case with TP-Link cards you might wanna try installing this driver. Otherwise, you can get a fenvi broadcom card for native support.

So i had a working Hackintosh made by a friend a long time ago (I have 0 knowledge about this stuff, but I do understand some basics). Later he upgrade some parts; Gigabyte Z390 mobo, some extra ram + Intel Core i7 9700K It worked like a charm but the wifi didn't work. Hence i always used it with lan cable. Now i moved and the lan socket there wasn't working. the pci network card inside never worked, so i thougth i just buy a ac1300 Tp usb adapater for wifi, instead of installing the drivers that people recommended using this usb dongle ( https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter) I ended up downloadin' the original one, And you guessed it, now my hackintosh doesnt boot, and it gives me this screen.

For the software you can look it up from here (https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter) and here (https://github.com/chris1111/D-LinkUtility-Package)

I've found this try if you have the V2

Have a look here. This is a driver to use Realtek chips on the latest versions of macOS. There's a list of working adapters on the page. Very likely this only works with Intel macs.

I tried using these instructions: https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter. I would get through everything, but when I had to reboot to finalize the installation, it never worked.