RTL8111_driver_for_OS_X VS AppleALC

Use this kext: https://github.com/Mieze/RTL8111_driver_for_OS_X

Have you tried RealtekRTL8111 ? Remember you'll also need to add the kext to your config.plist - refer to https://dortania.github.io/OpenCore-Install-Guide/ktext.html#ethernet for more info

Try thid one RealtekRTL8111 remove all netwrok related driver before , don't mix between them

RealtekRTL8111.kext

Hello, again again. I recently got help and finally installed MacOS on my AMD PC. But, I have a RX 6600 and RX 580, Big Sur is not compatible with the RX 6600, but Monterey is. So i tried to install Monterey. I was previously using the SmallTree kext for my Intel GBe NIC but it no longer works in Monterey. So how do I get the Killer E2500 NIC to work? I've tried the AtherosE2200Ethernet kext and RealtekRTL8111 kext, but both of them have not worked. So, does anyone know how to fix it? I would rather not use IntelIGB as it looks like it is unstable and I kinda need a stable connection. But if the Intel NIC can be fixed that would work too. Thank You!

Btw just found this repository, will this work?

I'm using Ethernet, but because the kext are not working I can install Big Sur. My motherboard is a Gigabyte A320M-S2H and I'm using RealtekRTL8111 (I've already tried older versions) and in the config.plist are enabled. Hope someone can help me.

As the guide states, "Atheros Killer E2500 models are actually Realtek based, for these systems please use RealtekRTL8111 instead." So replace AtherosE2200Ethernet.kext with RealtekRTL8111.kext.

For Ethernet port TEST this kext and see if working (https://github.com/Mieze/RTL8111_driver_for_OS_X) but, when I search for RTL8723BE, I see WiFi card ! please post your Exact System Config ...

Conexant CX20724 ISST Audio - AppleALC, , layout ID 13

https://github.com/acidanthera/AppleALC/wiki/Supported-codecs set alcid accordingly

I don't. Have you looked at the AppleALC wiki to see which IDs that might need? https://github.com/acidanthera/AppleALC/wiki/Supported-codecs

I have a Comet Lake laptop (i7-10510U & UHD 620) with the ALC294 Audio Card. I've tried all of the layout ID's listed on https://github.com/acidanthera/AppleALC/wiki/Supported-codecs. But all of them sound the same. I'm also using macOS Monterey... Any fix?

Do not enter the digits of your audio codec as your alcid. For example: "alcid=298" (ALC298). Use appropriate alcids from the AppleALC wiki: https://github.com/acidanthera/AppleALC/wiki/Supported-codecs

CPU: Intel Core i5-10500H (Comet Lake) [CPU slightly undervolted within BIOS] GPU: Intel UHD 630 (+ NVIDIA GeForce 1650 with Max-Q Design that's disabled via ACPI and boot-args) RAM: 12 GB Motherboard/Laptop Make and Model: MSI GF63 Thin 10SXCR Audio Codec: ALC223 Ethernet Card: RTL8111HS-CG Wifi/BT Card: Intel 802.11ax Wi-Fi 6 + Bluetooth v5.1 Touchpad and touch display devices: HID-Compliant Touchpad (Used VoodooI2C for touchpad) BIOS revision: -

Use linux to find out your audio codec (ALC...) and use this to narrow down the layout ids you could use. Try all of them and see which one works. Good luck!

So..i have a Lenovo Legion 7i Laptop with Realtek ALC287 audio codec, i've used layout-id 11 and 21, (21 seems to be better, since an internal and external mic device seems to be appearing on the System Preferences) however, although slider, volume, works...i still got no audio (both input and output), been surfing around and got to this link : https://github.com/acidanthera/AppleALC/wiki/Dumping-processing-coefficients