VoronMods Alternatives

VoronMods reviews and mentions

• Users of BTT SB2209/SB2240 - What are you using to mount the back end of the wire to the gantry?
  1 project | /r/VORONDesign | 21 Mar 2023

  kejar31 has an A-Drive umbilical mount as part of his CB-C2 mod. It's designed for larger wire, but should work with minor modifications.

• Serial Request: V2.4 - blender#8476
  1 project | /r/voroncorexy | 12 Feb 2023

  the mod is an ebb36 mount with a small cooling fan and cable glands CB-C2 by kejar31

• Do they make short dupont connectors?
  1 project | /r/VORONDesign | 23 Jan 2023

  I am switching over to an EBB36 on my V2.4 and I want to use to use the CB-C2 cover ( https://github.com/kejar31/VoronMods/tree/main/CB-C2) but I am running into clearence issues.

• Serial Request: Voron 2.4 R2 350mm. Discord: Drewinator#3664
  1 project | /r/voroncorexy | 18 Nov 2022

  I didn't design it. I just meant I added it to my build. I got it from here: https://github.com/kejar31/VoronMods/tree/main/CB-C2

• Serial Request Voron Trident 300mm jrubiks1209#3798
  2 projects | /r/voroncorexy | 26 Oct 2022

  the umbilical on the A motor is on printables as you said, and the CB-C2 is https://github.com/kejar31/VoronMods/tree/main/CB-C2

• How does one know what is the best configuration to build?
  7 projects | /r/VORONDesign | 16 Sep 2022

  I went with the Stealthburner with CW2 instead of the AB with CW1. I also did CAN and went with the EBB36. I had planned to do the normal cable chains, but ended up switching to an umbilical for the extruder and chain for the Y (endstop board). I also did the AB Idler mod as I've seen a lot of people post problems with the stock one splitting at the tension bolt. I also did not use the stock induction sensor and went with a CR-Touch. The CR Touch mod does require a modifcation to the single MGN-12 carriage. I have my modified STLs/F3D files if you're interested. I had the klicky (unklicky) mod for a while but had issues with heat causing the gantry mount to shift ever so slightly where I had mounting problems when warm. I've got about 150 hours of printing on the CR touch so far with no issues. I also did the purge/wipe bucket as well. At some point, I will likely do the pin mod and change the umbilical mod to this one and relocate the X endstop the print carriage and Y endstop the A drive mount. I also swapped out the door hinges after a few hours.

• Serial Request - Voron 2.4 - Discord Teol037#2025
  2 projects | /r/voroncorexy | 18 Aug 2022

  toolhead using CB-C2 along with lgx-lite cw2 mount

• A note from our sponsor - InfluxDB
  www.influxdata.com | 16 May 2024

  Get real-time insights from all types of time series data with InfluxDB. Ingest, query, and analyze billions of data points in real-time with unbounded cardinality. Learn more →