rtw89 VS USB-WiFi

I found this GitHub link that contains instructions on how to compile the driver for most distributions. However, they require usage of make install so I don't think that would work on NixOs.

I have the older version with the 6900HS but it’s more or less the same. I’ve run pop_os as well as fedora on it. Everything works great but you’ll have to compile the wifi driver https://github.com/lwfinger/rtw89.

I have seen other people with newer Lenovo systems reporting success with this: https://github.com/lwfinger/rtw89/blob/main/README.md

This is a Realtek rtl8852be chipset and uses the rtw89 driver which does not come prepackaged in the Linux kernel... See https://github.com/lwfinger/rtw89

Got mine working on a fresh Ubuntu 22.04 with 7 commands: sudo apt update && sudo apt upgrade sudo apt install make gcc build-essential git git clone https://github.com/lwfinger/rtw89.git cd rtw89 make sudo make install sudo reboot 0

Yes I guess, its already been reported in earlier versions. I tried to install from code, https://github.com/lwfinger/rtw89 But it didn't work either.

Realtek drivers are such a PITA. Check out this guys Github: Link he has instructions on how to get the most common realtek chipsets working. Please note, kernel updates will break the drivers for all realtek workarounds and you will have to redo this after each update.

but to my understanding, it cannot be installed due to kernel related issues. so i tried installing this instead with no luck: https://github.com/lwfinger/rtw89

apt-get install make gcc linux-headers-$(uname -r) build-essential git Install 'fix': git clone https://github.com/lwfinger/rtw89.git -b v5 cd rtw89 && make && sudo make install load module: sudo modprobe rtw89pci

git clone https://github.com/lwfinger/rtw89.git -b v5 cd rtw89 && make && sudo make install

I've already had a look at this but unsure how often it's updated, 6 months ago according to github: https://github.com/morrownr/USB-WiFi/blob/main/home/The_Short_List.md

Just google "raspberry pi wifi adapter" or see https://github.com/morrownr/USB-WiFi

Just a note that if you're _serious_ about WiFi on the Raspberry Pi... you should use an external WiFi adapter—either PCIe or USB.

With the Compute Module 4, I've successfully tested a variety of adapters [1], from WiFi 6E to older mini PCIe and M.2 cards. There's even a board made for the purpose of multi-WiFi testing, the Seaberry [2].

The Raspberry Pi 5 works with all the PCIe WiFi chips I've tested (haven't had time to summarize testing on pipci database site yet, including a mt7921u-based WiFi 6E USB adapter (haven't written that up, but check out [3]).

[1] https://pipci.jeffgeerling.com/#network-cards-nics-and-wifi-...

[2] https://pipci.jeffgeerling.com/boards_cm/seaberry.html

[3] https://github.com/morrownr/USB-WiFi/issues/137#issuecomment...

Hey all, I've read the Github list of Linux WiFi adapters (https://github.com/morrownr/USB-WiFi/blob/main/home/The_Short_List.md) but I've seen sporadic comments of certain users saying some haven't worked for them. I'm a bit risk averse buying something most likely from the USA and waiting a while for it to get to Australia and it not work, so I was hoping some people could comment with their specific models that have worked for them.

It would. These should work, as clients and in AP mode. https://github.com/morrownr/USB-WiFi