octoprint_install VS Cura

git clone https://github.com/paukstelis/octoprint_install.git.

I'm using an Inovato Quadra on my Ender 3 Pro. It was easy to setup with this script.

https://github.com/paukstelis/octoprint_install This is the installer script I used on my orange pi to set it up. Through the setup process it has you connect your webcam and set resolution and frame rate. Make sure you choose mjpg streamer vs ustreamer because Octolapse doesn't allow you to change camera settings if you choose ustreamer.

This script can help get Octoprint set up.

The guides I followed (this and this) both set the Octoprint service to autostart, so I can reboot from the browser or SSH or power cycle and Octoprint is active.

Should you have wanted to save yourself significant time, just could have just installed Debian and run the octoprint_install script: https://github.com/paukstelis/octoprint_install

Sorry, that's my bad. I'm running OctoPi on an old desktop, set up with Octoprint_Install: https://github.com/paukstelis/octoprint_install. The stream URL it gave by default is /cam_octoprint/?action=stream. Though while typing this comment, you did tip me off to something that actually fixed it! I was able to access my Octoprint instance with the Port 5000 URL, so never tried it without it. Once I deleted that port from the URL, I was able to access my Octoprint instance and the webcam stream is functioning! Thank you for your help!

Are you using Cura?

EDIT2: Turns out one of my problems was dodgy End code in Cura [5.4.0] Questionable end gcode in some default profiles for Anycubic printers · Issue #16621 · Ultimaker/Cura (github.com)

Full release notes and new Cura downloads can be found here https://github.com/Ultimaker/Cura/releases/tag/5.5.0

So I'm using beta version of Cura (5.5.0) with V3 SE profile from https://github.com/Ultimaker/Cura/pull/16796 and I just figured out that Creality print is way faster than Cura. As far as I can see, settings are almost identical; print speed is set to 180mm/s in both programs. I'm using stock PLA profile in Creality print and eSun pla+ profile in Cura - same temperature, infill, walls and fan settings.

github.com/Ultimaker/Cura/issues for a bug report including Windows version.

In this case, Cura is an open source project, so the most straightforward way of submitting a feature request would be by creating an Issue in the code repository, where you can explain your idea along with why it’s important to you, who else you think it could be valuable to, and what you want both minimally and ideally.

If you're using the Startup Optimizer plugin, try disabling it temporarily - it can occasionally interfere with the list of available printers. Should that not help you could manually re-insert the profile by copying this JSON into the appropriate directory (eg C:\Program Files\UltiMaker Cura 5.4.0\share\cura\resource\definitions).

This reminds me of this known issue we mentioned in the changelog: Support Brim is missing if the Buildplate Adhesion is set to None. We are tracking reports here.

Yes..there's some sort of bug in 5.3..5.2 is ok, the developers are working on a patch for the new version: https://github.com/Ultimaker/Cura/issues/14811