new-lg4ff VS t150_driver

I found that the above comes in two variants, PS/PC and XBOX/PC. While the former is currently supported via an external driver (new-lg4ff), the latter has native kernel support. While I do expect to have a smoother experience with the native module, the custom driver claims to have a richer feature set than the native hid-logitech module (differences).

Go to the game settings and adjust the FF levels. (Except if you're on Linux, you'll also need the experimental kernel module, as the stock one has only rudimentary FF support).

The people Behind the logitech driver new-lg4ff most logitech wheels work fantastic now.

On Linux there's libratbag/Piper for keyboards and mice and new-lg4ff/Oversteer for steering wheels, if you want to take a look at how they do some things or straight up just fork them and port to Windows.

You want this for your G29 if you haven't already installed it. I will admit that sim racing is a blind spot in Proton's support, but this should at least fix some of the wheel-related problems.

In my opinion the best (community) support at the moment is from Logitech. I have one and it works very well with the new-lg4ff driver. I know the creator, u/berarma, and I know that the support is active. If you need an opinion on models, the G27 (second hand) or the G29 work great on Linux with new-lg4ff.

I would not bother. There's an unofficial driver for linux but it looks like it only partially supports force feedback. Force feedback is the only reason to use a wheel in the first place.

So, I'm basically trying to make my Thrustmaster TMX Pro work under Fedora 36. I already tried using [tmdrv](https://github.com/her001/tmdrv) with [scarabuto's T150 driver](https://github.com/scarburato/t150_driver) and [emtek995's TMX / TMX Pro driver](https://github.com/emtek995/TMX-driver). With both ways nearly everything is workig except the calibration with jscal, which shows the Axis to be about 30000, instead of the correct 60000 large. As a result I have a weird deadzone of about 20° in every direction from the center. In Windows everything works fine.

I was struggling a while back with these drivers, but couldn't make it work. Specifically I use Thrustmaster T150, so might be that my model isn't supported

t150_driver

I have a thrustmaster T150 steering wheel for my PC, and I installed a driver from this github page, and it worked right away when I launched euro truck simulator 2 in the native version. But becasue I found out that the native version has significantly worse performance than proton and it didn't support vkBasalt, I switched. When I launched ETS2 with proton, it was not detected anymore.

There are kernel modules for other Thrustmaster wheels such as the T150 and T300RS but not the T80, unfortunately.

-Thrustmaster T150 with T150_driver

I'm successfully using t150_driver with my Thrustmaster T150 in Eurotrucks 2 on Linux (Ubuntu 20.04).

you should reply directly to the user so I get a notification when you respond, I only noticed this post by chance. Anyways something like this should work https://github.com/scarburato/t150_driver/blob/master/files/etc/udev/rules.d/10-t150.rules but you will have to replace the name/model id/vendor id with the appropriate ones, I'm surprised that tmdrv doesn't have an example rule

If you own a T150 or T300RS Thrustmaster wheel, you have this drivers: https://github.com/scarburato/t150_driver