nbfc-linux VS nbfc

Does this work for every laptop, or just tuxedos? I'm currently using nbfc linux

For laptops there's nbfc or its rewrite nbfc-linux.

https://github.com/nbfc-linux/nbfc-linux, it's serving me well

Obviously replace Your Laptop Model with your actual laptop model, from this list https://github.com/nbfc-linux/nbfc-linux/tree/main/share/nbfc/configs

https://github.com/hirschmann/nbfc I've used this in the past. The only part I don't like is it uses Mono, although it worked fine for me. There is also a linux port for this : https://github.com/nbfc-linux/nbfc-linux, but I'm having trouble with it.

sorry I'm not much of a hardware guy at all, so that lspci output is kind of alien to me... could the Serial Controller have anything to do with the fan...? btw, I forgot to mention that while I cannot get the fan speed in rpm, I could control it with nbfc-linux by using the pre-made profile for either the 8460p or 8460w iirc, on Artix Linux. Fairly recently made a clean install of Mint, though. Thanks for your help!

git clone https://github.com/nbfc-linux/nbfc-linux.git cd nbfc-linux make && sudo make install

Exactly! I use config for Acer Predator G3-572. If that won't work just try some Acer configs it shoud work. Here's the github repo for nbfc-linux: https://github.com/nbfc-linux/nbfc-linux

The only other thing I can think of is https://github.com/hirschmann/nbfc

Try Notebook FanControl. There's a config profile for GL702VM included.

Non tinkerer answer: no Otherwise: Maybe, specially if you are a programmer, take a look at this project https://github.com/determ1ne/OmenHubLight (it supposedly supports four zones rgb and fan control), or this one https://github.com/alou-S/omen-fan which is for linux, but should give you an idea of what has to be done and maybe port it to windows using ec-probe utility from https://github.com/hirschmann/nbfc, and last but not least the hp-wmi linux driver https://github.com/torvalds/linux/blob/master/drivers/platform/x86/hp/hp-wmi.c which has some of the gaming hub features ported.

As a person that still uses Linux on my laptop (its an old gaming laptop I use as a server) I know your pain about fan control, on windows you have many functional fancontrol software but on Linux it's crickets I did find this utility that worked for my laptop but it took over 3 hours for me to figure out how it worked and properly configure it for my specific gaming laptop

There are hacky ways like NBFC here: https://github.com/hirschmann/nbfc This tool works by writing embedded controller registers directly. This can work for some laptops but has its own danger to it.

To depress just yet, fortunately, there is a very nice, open-source windows tool that can be used to control a laptop fans: NOTEBOOK FAN CONTROL

You have access to the fan curves only thru Armoury Crate's manual mode . I haven't personally tried this but there was an app called "notebook fan control", it might be helpful . I used to run it on my GL502VY laptop back in the day where it was kinda impossible to change the fan speeds. You can find it on github