hillside VS Dactyl-It-Yourself-Editor

Only two thumb keys seems like it could be a pain. I don't love trying to figure out the timing delays for tap vs hold. After a long search I settled on the Hillside 46 [1][2] which has 4 thumb keys and a splayed layout. Also choc spacing, as I didn't love the gaps between choc keycaps with mx spacing. Not sure why, as the macbook pro keyboard doesn't seem to give me any problems.

I like the all the case options and mods available to the ZSA keyboards. The biggest problem with building your own I feel is the cost of getting a nice, solid feeling case.

[1] https://github.com/mmccoyd/hillside/tree/main/hillside46

There are a few things that are close: * The Cantor/Piantor: more aggressive stagger and slightly changed thumb cluster. * The Swept Corne: essentially a big sweep. * The Hillside 46/48: This comes in many forms which are very similar to what you are looking for. Essentially an extra aggressive stagger (and perhaps splayed) Corne with a bigger thumb cluster.

I don’t have personal experience no. If you want to compare, here is a image of the key location: https://github.com/mmccoyd/hillside/blob/main/hillside46/doc/image/hill46_keys.png others exist for the other sizes in similar places. You can print this out, making sure you size so that the keys are properly spaced, and then compare that way

hillside

the first thing that pops into my head is something like the Hillside 52/56?

I'd recommend a Hillside. If you're not into the splay, there's the 48 and the 56. https://github.com/mmccoyd/hillside

Hillside ? https://github.com/mmccoyd/hillside

But I've been building keebs for a few years now, and I gotta cut back :-P The biggest issue is it takes forever to print a shell to 'test fit' it. It would actually be cool if you could print the shells upside down so you don't have to print the whole thing to see how it feels.

Oh! looks like there's a OpenSCAD parametric dactyl now (1) I think this was the clojure one I was playing with before: (2)

1: https://github.com/pseudoku/Dactyl-It-Yourself-Editor

2: https://github.com/l4u/dactyl-manuform-mini-keyboard

Link to Miniwarp https://github.com/pseudoku/Dactyl-It-Yourself-Editor/blob/master/Things/MiniWarp.stl

I used Dactyl-It-Yourself-Editor to create the base model. Further heavily modified in Fusion360.

The original Hypo Warp is all MX based and it is available on github. So you can use that one instead.

Thanks, the board is a MiniWarp by Pseudoku. The stl is in their github repo