Dactyl-It-Yourself-Editor VS stenogotchi

But I've been building keebs for a few years now, and I gotta cut back :-P The biggest issue is it takes forever to print a shell to 'test fit' it. It would actually be cool if you could print the shells upside down so you don't have to print the whole thing to see how it feels.

Oh! looks like there's a OpenSCAD parametric dactyl now (1) I think this was the clojure one I was playing with before: (2)

1: https://github.com/pseudoku/Dactyl-It-Yourself-Editor

2: https://github.com/l4u/dactyl-manuform-mini-keyboard

Link to Miniwarp https://github.com/pseudoku/Dactyl-It-Yourself-Editor/blob/master/Things/MiniWarp.stl

I used Dactyl-It-Yourself-Editor to create the base model. Further heavily modified in Fusion360.

The original Hypo Warp is all MX based and it is available on github. So you can use that one instead.

Thanks, the board is a MiniWarp by Pseudoku. The stl is in their github repo

Sounds like you're trying to build a Stenogotchi

If you're familiar with Plover, the Stenogotchi might be something you could look at as well, if the devices you're working with support bluetooth.

Yes. Check out https://github.com/Anodynous/stenogotchi

I'm in the same boat, that's why I started working on the Stenogotchi.

Check out stenogotchi [1] if you haven't already. Plover running on a battery-powered Rasperi Pi Zero.

[1] https://github.com/Anodynous/stenogotchi

Definitely. The raspberry pi zero w is particularly well suited for this due to its small size and built-in bluetooth. You can take a look at my hobby project with this same goal in mind, the Stenogotchi, for inspiration.