USB-WiFi VS archer-t2u-plus-linux

I've already had a look at this but unsure how often it's updated, 6 months ago according to github: https://github.com/morrownr/USB-WiFi/blob/main/home/The_Short_List.md

Just google "raspberry pi wifi adapter" or see https://github.com/morrownr/USB-WiFi

Just a note that if you're _serious_ about WiFi on the Raspberry Pi... you should use an external WiFi adapter—either PCIe or USB.

With the Compute Module 4, I've successfully tested a variety of adapters [1], from WiFi 6E to older mini PCIe and M.2 cards. There's even a board made for the purpose of multi-WiFi testing, the Seaberry [2].

The Raspberry Pi 5 works with all the PCIe WiFi chips I've tested (haven't had time to summarize testing on pipci database site yet, including a mt7921u-based WiFi 6E USB adapter (haven't written that up, but check out [3]).

[1] https://pipci.jeffgeerling.com/#network-cards-nics-and-wifi-...

[2] https://pipci.jeffgeerling.com/boards_cm/seaberry.html

[3] https://github.com/morrownr/USB-WiFi/issues/137#issuecomment...

Hey all, I've read the Github list of Linux WiFi adapters (https://github.com/morrownr/USB-WiFi/blob/main/home/The_Short_List.md) but I've seen sporadic comments of certain users saying some haven't worked for them. I'm a bit risk averse buying something most likely from the USA and waiting a while for it to get to Australia and it not work, so I was hoping some people could comment with their specific models that have worked for them.

It would. These should work, as clients and in AP mode. https://github.com/morrownr/USB-WiFi

I am using fedora 27. TP-Link Archer T2U Plus adapter didnt work out of the box. I tried https://github.com/nlkguy/archer-t2u-plus-linux this. sudo make dkms_install gives:

Github: https://github.com/nlkguy/archer-t2u-plus-linux

Im using this guide to install the Linux drivers of the USB Wifi: https://github.com/nlkguy/archer-t2u-plus-linux.

I am trying to make my Wifi usb adapter to work. I have tried out this Github Guide Officially it's not a supported Adapter,but I have seen many success. I managed to compile and install the driver,but Wifi is Unavailable and I can't see any of the APs.

Yesterday tried to use tp-link archer t2u plus (AC600) on clean updated 6.1 OS (second boot option on separated SSD). Updates were installed via broken but not unplugged Asus AC2100 Dual-Band PCIe (antenna broken, but connectors give wireless 1-2 Mb/s 2,4 hz somehow). Driver were installed by following instructions on https://github.com/nlkguy/archer-t2u-plus-linux from Debian Based Linux Distros. After that i disconnected Asus AC2100 from motherboard, booted up OS again and it sucsessfully connected to wi-fi 5 hz 210 Mb/s. Next day it wasn't working. Even LED indicator was off and iwconfig showed "no device". Where did I fail and what should I do next? And can i fix it somehow without internet? Please help.

Hello everyone recently decided to move from macosx to ubuntu 20.04 every part of my setup worked like a charm except wifi card, i've done some research about this card and officialy i'ts not linux supported. But there are a lot of tutorials how to use third party drivers like https://github.com/nlkguy/archer-t2u-plus-linux unfortunately for me after instalation of this drivers card does not work it's listed in usb devices but not listed as network device. If somebody know how to fix that i will appreciate help. I can provide logs and outputs i just have to know which command.