ShiftRegisterLEDMatrixLib VS ArduinoJoystickLibrary

Looks like you are using ‘595 shift registers to control the rows and columns. In case you are interested, I’ve written a Arduino driver for LED matrices like this one (I’ve made similar matrices). The driver is based on AdaFruit’s GFX library, making it easy to creat images. You can get it here: https://github.com/michaelkamprath/ShiftRegisterLEDMatrixLib

Cool! I done a similar project. Since you are using shift registers, if you are looking for an Arduino based driver software, check out this library (which I wrote): https://github.com/michaelkamprath/ShiftRegisterLEDMatrixLib

I'm at a good point with the code and the hardware, but I ran into this issue where the library says that you can define up to 2 hat switches, and I need to use both and here's the problem.

I have a project where I want to turn a hall sensor Apem joystick into a PTZ-controller in OBS to control cameras in a live stream. I am using this library: https://github.com/MHeironimus/ArduinoJoystickLibrary

I would use a joystick-library like https://github.com/MHeironimus/ArduinoJoystickLibrary

I used the joystick library for arduino https://github.com/MHeironimus/ArduinoJoystickLibrary. Very easy to code, especially following this video. You can also map other types, such as x, y, z axis, rudder, accelerator, plus buttons. I'm planning to add a TO/GA button and AP/ATHR disengage buttons.

Yep, my bad. I got confused with the numbers. Also, did some googling and from what I can see here even though you can map more than 32 buttons the default Windows joystick tester won't display them.

This example might help you get you started. You can't directly "assign" a pin to an axis with this library. However, you can approach it a couple different ways.