RTL8111_driver_for_OS_X VS Wireless-USB-Adapter-Clover

Use this kext: https://github.com/Mieze/RTL8111_driver_for_OS_X

Have you tried RealtekRTL8111 ? Remember you'll also need to add the kext to your config.plist - refer to https://dortania.github.io/OpenCore-Install-Guide/ktext.html#ethernet for more info

Try thid one RealtekRTL8111 remove all netwrok related driver before , don't mix between them

RealtekRTL8111.kext

Hello, again again. I recently got help and finally installed MacOS on my AMD PC. But, I have a RX 6600 and RX 580, Big Sur is not compatible with the RX 6600, but Monterey is. So i tried to install Monterey. I was previously using the SmallTree kext for my Intel GBe NIC but it no longer works in Monterey. So how do I get the Killer E2500 NIC to work? I've tried the AtherosE2200Ethernet kext and RealtekRTL8111 kext, but both of them have not worked. So, does anyone know how to fix it? I would rather not use IntelIGB as it looks like it is unstable and I kinda need a stable connection. But if the Intel NIC can be fixed that would work too. Thank You!

Btw just found this repository, will this work?

I'm using Ethernet, but because the kext are not working I can install Big Sur. My motherboard is a Gigabyte A320M-S2H and I'm using RealtekRTL8111 (I've already tried older versions) and in the config.plist are enabled. Hope someone can help me.

As the guide states, "Atheros Killer E2500 models are actually Realtek based, for these systems please use RealtekRTL8111 instead." So replace AtherosE2200Ethernet.kext with RealtekRTL8111.kext.

For Ethernet port TEST this kext and see if working (https://github.com/Mieze/RTL8111_driver_for_OS_X) but, when I search for RTL8723BE, I see WiFi card ! please post your Exact System Config ...

I'm looking at building a small form factor/ITX Hackintosh and have found a ton of great build logs here. However, I notice a lot of Intel ITX builders (https://www.reddit.com/r/hackintosh/comments/i3pega/z490_itx_guide/) replace the Intel/RealTek wifi with a Broadcom M2 card like the BCM94360CD. But this results in them having to buy an adapter + extender, then route extension cable all over their case, and have the new antennas on the new adapted card taped to the case, along with the original antenna mounting points on the MOBO now being unused. Are there technical reasons for not using a USB Wifi Adapter instead, other than the hassle of having to plug it in? (Such as the ones listed here: https://github.com/chris1111/Wireless-USB-Adapter-Clover)

Right-click on your kext. Do 'Get Info' so you can see the version number. Next, see if there is Chris111 has an update. If you updated the kext recently, try an older version as that happened to me with IntelMausiEthernet and I had to fix it until I found out about IntelMausi which works more smoothly.