RTL8111_driver_for_OS_X VS VoodooRMI

Use this kext: https://github.com/Mieze/RTL8111_driver_for_OS_X

Have you tried RealtekRTL8111 ? Remember you'll also need to add the kext to your config.plist - refer to https://dortania.github.io/OpenCore-Install-Guide/ktext.html#ethernet for more info

Try thid one RealtekRTL8111 remove all netwrok related driver before , don't mix between them

RealtekRTL8111.kext

Hello, again again. I recently got help and finally installed MacOS on my AMD PC. But, I have a RX 6600 and RX 580, Big Sur is not compatible with the RX 6600, but Monterey is. So i tried to install Monterey. I was previously using the SmallTree kext for my Intel GBe NIC but it no longer works in Monterey. So how do I get the Killer E2500 NIC to work? I've tried the AtherosE2200Ethernet kext and RealtekRTL8111 kext, but both of them have not worked. So, does anyone know how to fix it? I would rather not use IntelIGB as it looks like it is unstable and I kinda need a stable connection. But if the Intel NIC can be fixed that would work too. Thank You!

Btw just found this repository, will this work?

I'm using Ethernet, but because the kext are not working I can install Big Sur. My motherboard is a Gigabyte A320M-S2H and I'm using RealtekRTL8111 (I've already tried older versions) and in the config.plist are enabled. Hope someone can help me.

As the guide states, "Atheros Killer E2500 models are actually Realtek based, for these systems please use RealtekRTL8111 instead." So replace AtherosE2200Ethernet.kext with RealtekRTL8111.kext.

For Ethernet port TEST this kext and see if working (https://github.com/Mieze/RTL8111_driver_for_OS_X) but, when I search for RTL8723BE, I see WiFi card ! please post your Exact System Config ...

SMBus trackpad - VoodooRMI

I have the github issue here for more info: https://github.com/VoodooSMBus/VoodooRMI/issues/165

Using the currently recommended method (https://github.com/VoodooSMBus/VoodooRMI/) to load Synaptics touchpad does not work on this machine. If I am only use VoodooPS2Controller to drive the trackpoint and trackpad, trackpad would not click by touching.

Is it Synaptics? It might work with VoodooRMI: https://github.com/VoodooSMBus/VoodooRMI Not sure why VoodooPS2 would have issues unfortunately.

Are you sure your touchpad is only PS/2? (check here) You may also need VoodooRMI, VoodooSMBus, and/or VoodooI2C (and its plugins).

Hello, I've been trying to make my trackpad be recognized as one (it works just as a mouse) but still unsuccessful. I think it is a HID I2C, so I've tried difffent kext of VoodooI2C, VoodooI2CHID, Alps HID VoodooRMI, VoodooI2CElan, etc but nothing works. So I've tried to make the SSDT-GPI0, but I don't know how I should modify it, because my _sta is different from the guide. Also tried _OSI to XOSI patch.

• Off topic but I believe you got SMBus trackpad, better to use VoodooRMI instead of ApplePS2SmartTouchPad (better gestures support)