DGUS-reloaded-Klipper VS zippy-klipper_config

The stock screen needs this klipper fork and their screen firmware https://github.com/Desuuuu/DGUS-reloaded-Klipper

I have the stock screen install currently. While it works with a modified version of Klipper (https://github.com/Desuuuu/DGUS-reloaded-Klipper), that release is 2-3 years old now. I use vanilla Klipper so that I can can stay up to date with the latest releases. I don't find much use to a screen because my computer is near my printer and I just use Fluidd (or Mainsail, or Octoprint, etc.).

I’m running it on all three of mine. It works well. There is nice firmware for the screen available from Desuuuu on GitHub. https://github.com/Desuuuu/DGUS-reloaded-Klipper

.https://github.com/Desuuuu/DGUS-reloaded-Klipper

There is an old, now quite outdated, attempt at supporting the Ender 3 v2 touchscreen on Klipper through a fork. But that has not been updated in quite a while and it never really worked well enough to actually use in the first place. I strongly recommend you don't try to use that fork, but if you do you will need to recompile and re-flash the firmware as it uses an older version of Klipper. Again, this has not been updated in over a year. Do not try to use it.

With klipper i use https://github.com/Desuuuu/DGUS-reloaded-Klipper Shows temperatures and progress, i like it.

See my guide for more detail

i’ve adapted macros and some things from this repo https://github.com/rootiest/zippy-klipper_config

try this out https://github.com/rootiest/zippy-klipper_config/blob/master/guides/GUIDE-axis_limits.md

klipp tut

I'd suggest giving my guide a read

Here is my beeper tune collection if anyone is interested

Check out my guide

Try my guide for simple, basic start/end print macros.

Check out this simplified config I made