zippy-klipper_config VS mainsail

See my guide for more detail

i’ve adapted macros and some things from this repo https://github.com/rootiest/zippy-klipper_config

try this out https://github.com/rootiest/zippy-klipper_config/blob/master/guides/GUIDE-axis_limits.md

klipp tut

I'd suggest giving my guide a read

Here is my beeper tune collection if anyone is interested

Check out my guide

Try my guide for simple, basic start/end print macros.

Check out this simplified config I made

Klipper is awesome and once it’s installed and up and running I can control my printer via my LAN network and upload STL’s and control the printer using the Mainsail Web interface. https://docs.mainsail.xyz

I prefer Klipper. It requires another computer (such as a raspberry pi) but it is so much easier to modify and make changes. It also has built in leveling functions and other great benefits. https://docs.mainsail.xyz/ https://www.klipper3d.org/

It's https://docs.mainsail.xyz/

My recommendation if your just setting up: do yourself a huge favor and do not use OctoPrint. Instead I recommend using Mainsail of Fluidd. They’re both great web interfaces designed specifically for Klipper. Very fast, lightweight and take advantage of all available Klipper functions. Octoprint is very resource hungry.

Convert that thing to a corexy via Mercury One, throw a Stealthburner on it, and get yourself a raspberry pi to run Klipper/Mainsail.

In the past I used OctoPrint, but now I moved to Mainsail, because it has a better ui and some plugins are directly build in. You can install Kiauh and use it to install Mainsail or Fluidd next to OctoPrint.

Personally I prefer Mainsail. But Fluidd is also popular.

If you can get ahold of a Raspberry Pi, MainsailOS is a prebuilt sd card image that has everything preinstalled.