DGUS-reloaded-Klipper VS DWIN_T5UIC1_LCD

The stock screen needs this klipper fork and their screen firmware https://github.com/Desuuuu/DGUS-reloaded-Klipper

I have the stock screen install currently. While it works with a modified version of Klipper (https://github.com/Desuuuu/DGUS-reloaded-Klipper), that release is 2-3 years old now. I use vanilla Klipper so that I can can stay up to date with the latest releases. I don't find much use to a screen because my computer is near my printer and I just use Fluidd (or Mainsail, or Octoprint, etc.).

I’m running it on all three of mine. It works well. There is nice firmware for the screen available from Desuuuu on GitHub. https://github.com/Desuuuu/DGUS-reloaded-Klipper

.https://github.com/Desuuuu/DGUS-reloaded-Klipper

There is an old, now quite outdated, attempt at supporting the Ender 3 v2 touchscreen on Klipper through a fork. But that has not been updated in quite a while and it never really worked well enough to actually use in the first place. I strongly recommend you don't try to use that fork, but if you do you will need to recompile and re-flash the firmware as it uses an older version of Klipper. Again, this has not been updated in over a year. Do not try to use it.

With klipper i use https://github.com/Desuuuu/DGUS-reloaded-Klipper Shows temperatures and progress, i like it.

The screen doesn’t work by default unfortunately. There is a workaround to get it working. But I found that the default screen is redundant since I’m controlling everything through my laptop or my phone using the web interface. So I removed the original screen entirely

Klipper supports use of a screen. Even the stock Ender 3 screen can be used.

Original: https://github.com/odwdinc/DWIN_T5UIC1_LCD

For Moonraker: https://github.com/bustedlogic/DWIN_T5UIC1_LCD or this for Octoprint: https://github.com/odwdinc/DWIN_T5UIC1_LCD

if you’re using a rpi to run klipper you can kinda use it, https://github.com/odwdinc/DWIN_T5UIC1_LCD

I saw this project which seems to incorporate all of that by connecting the display directly to the pi, has anyone used this successfully?

i consider myself an intermediate linux/pi/etc user, as i can putz around, follow instructions, and usually fix my mistakes. now, i was curious if, through this method, would it be possible to use the included screen on the piboy and use the integrated controls?

I was looking around for how to get the V2's display working with klipper and Just found this: https://github.com/odwdinc/DWIN_T5UIC1_LCD