wifi-gbp-emulator VS arduino-gameboy-printer-emulator

Nice! I built a 'printer' based on the ESP8266, following this project. I didn't tested it's compatibility with anything else other than the Camera tho. It works fine to get photos out of the Camera and directly to a phone, since file transfers are done by a wifi network created by the ESP8266.

Nice! I got a green Camera and it's very fun to take photos with it. And you can build a device to transfer photos from your Gameboy to a smartphone by following this.

I didn't took so many photos with it, but got like 2 cool pictures of my cats. I'm finishing this project so I can export the photos, it's easy and cheap to do it. I'm planning to build a 'power bank' with rechargeable lipos that have both a 3V output to power my GBC and this module so I can export camera photos on the go. Still waiting for a few stuff to arrive so I can finish this project.

Not really the answer to your question and I'm not sure if you want to export the photos or just the savefile, but I'm using this (https://github.com/HerrZatacke/wifi-gbp-emulator) to export my photos.

I found this project that allows you to get the photos using a phone or pc via wifi. Seems to be easy enough.

https://github.com/HerrZatacke/wifi-gbp-emulator is around for quite a while

If you are a DIY kind of person, https://github.com/HerrZatacke/wifi-gbp-emulator

I was looking at this similar project yesterday: https://github.com/mofosyne/arduino-gameboy-printer-emulator

I used an arduino nano. upload this code to the arduino, and connect the wires in the link cable to the pins on the arduino, and then open this page in Edge or chromium (firefox doesnt unfortunately support Web Serial) https://herrzatacke.github.io/gb-printer-web/#/gallery/page/1 Then just go to the print menu in gameboy camera (multi print is in START -> Link -> Print -> options) and they will pop up in the web page

As an alternative to the gb operator, you can use Arduino with cut link cable to simulate gameboy printer and print to pc https://github.com/mofosyne/arduino-gameboy-printer-emulator after making it, open this page in Edge, connect the arduino through usb and link cable to the gameboy and start "printing" the image. in the web app it should show as transfering, and then it will let you save the png https://herrzatacke.github.io/gb-printer-web/#/gallery/page/1

Cheapest way? Probably this one.

I build one of these for about $25 bucks to get my pics off the camera and onto my computer. If you're comfortable soldering, it's pretty easy.

You can also make this really simple Gameboy Printer Emulator using an Arduino for <€10: https://github.com/mofosyne/arduino-gameboy-printer-emulator

I built one of these which let's you download the images to a computer. You could then print them on whatever printer you have. :-)

You can check this github. There is a lot of info, and the community is very nice.