t150_driver VS oversteer

I would not bother. There's an unofficial driver for linux but it looks like it only partially supports force feedback. Force feedback is the only reason to use a wheel in the first place.

So, I'm basically trying to make my Thrustmaster TMX Pro work under Fedora 36. I already tried using [tmdrv](https://github.com/her001/tmdrv) with [scarabuto's T150 driver](https://github.com/scarburato/t150_driver) and [emtek995's TMX / TMX Pro driver](https://github.com/emtek995/TMX-driver). With both ways nearly everything is workig except the calibration with jscal, which shows the Axis to be about 30000, instead of the correct 60000 large. As a result I have a weird deadzone of about 20° in every direction from the center. In Windows everything works fine.

I was struggling a while back with these drivers, but couldn't make it work. Specifically I use Thrustmaster T150, so might be that my model isn't supported

t150_driver

I have a thrustmaster T150 steering wheel for my PC, and I installed a driver from this github page, and it worked right away when I launched euro truck simulator 2 in the native version. But becasue I found out that the native version has significantly worse performance than proton and it didn't support vkBasalt, I switched. When I launched ETS2 with proton, it was not detected anymore.

There are kernel modules for other Thrustmaster wheels such as the T150 and T300RS but not the T80, unfortunately.

-Thrustmaster T150 with T150_driver

I'm successfully using t150_driver with my Thrustmaster T150 in Eurotrucks 2 on Linux (Ubuntu 20.04).

you should reply directly to the user so I get a notification when you respond, I only noticed this post by chance. Anyways something like this should work https://github.com/scarburato/t150_driver/blob/master/files/etc/udev/rules.d/10-t150.rules but you will have to replace the name/model id/vendor id with the appropriate ones, I'm surprised that tmdrv doesn't have an example rule

If you own a T150 or T300RS Thrustmaster wheel, you have this drivers: https://github.com/scarburato/t150_driver

Did you try oversteer?

I do not know lots about wheels in Linux, but I had come across this one day which may help you… https://github.com/berarma/oversteer

Is it possible to install Oversteer on Batocera and access the settings using the F1 menu?

What force feedback wheel are we talking about? Some are supported in the kernel and some have drivers on github. More info here.

A good place to look at is the oversteer github. It seems generally its only Logitech wheels which have good support on linux. Certain Thrustmaster and Fanatec wheels seem to work at least to some degree. However the t128 in particular is not mentioned anywhere

Oversteer, it's a Linux program which lets you use wheels. https://github.com/berarma/oversteer

For the wheel, I have a G29 which works without any issue. Rotation and FFB gain is customizable easily with oversteer which support G27 as well.

Unsure how easy to setup extra linux apps on SteamDeck, but this is one tool for FFB in linux : https://github.com/berarma/oversteer

there's oversteer: https://github.com/berarma/oversteer which says it works with your wheel once you also add this module: https://github.com/gotzl/hid-fanatecff