t150_driver VS hid-fanatecff

I would not bother. There's an unofficial driver for linux but it looks like it only partially supports force feedback. Force feedback is the only reason to use a wheel in the first place.

So, I'm basically trying to make my Thrustmaster TMX Pro work under Fedora 36. I already tried using [tmdrv](https://github.com/her001/tmdrv) with [scarabuto's T150 driver](https://github.com/scarburato/t150_driver) and [emtek995's TMX / TMX Pro driver](https://github.com/emtek995/TMX-driver). With both ways nearly everything is workig except the calibration with jscal, which shows the Axis to be about 30000, instead of the correct 60000 large. As a result I have a weird deadzone of about 20° in every direction from the center. In Windows everything works fine.

I was struggling a while back with these drivers, but couldn't make it work. Specifically I use Thrustmaster T150, so might be that my model isn't supported

t150_driver

I have a thrustmaster T150 steering wheel for my PC, and I installed a driver from this github page, and it worked right away when I launched euro truck simulator 2 in the native version. But becasue I found out that the native version has significantly worse performance than proton and it didn't support vkBasalt, I switched. When I launched ETS2 with proton, it was not detected anymore.

There are kernel modules for other Thrustmaster wheels such as the T150 and T300RS but not the T80, unfortunately.

-Thrustmaster T150 with T150_driver

I'm successfully using t150_driver with my Thrustmaster T150 in Eurotrucks 2 on Linux (Ubuntu 20.04).

you should reply directly to the user so I get a notification when you respond, I only noticed this post by chance. Anyways something like this should work https://github.com/scarburato/t150_driver/blob/master/files/etc/udev/rules.d/10-t150.rules but you will have to replace the name/model id/vendor id with the appropriate ones, I'm surprised that tmdrv doesn't have an example rule

If you own a T150 or T300RS Thrustmaster wheel, you have this drivers: https://github.com/scarburato/t150_driver

But... sim racing is an exception. Most of the games will work (though not iRacing), but support for the hardware is not there. If you google around, you'll find a lot of projects like this one), that are clearly of the "well, if you compile this thing, and you tweak a bunch of configs, maybe it'll mostly work in some games most of the time, if you're lucky" variety.

- Installed hid-fanatec to get it working with FFB (https://github.com/gotzl/hid-fanatecff)

The fanatec wheel should be supported by this HID driver, but I have not tested it out. And the Rift S is just a no go.

Yep oversteer in combo with the hid-famatefff driver is likey the best bet.

there's oversteer: https://github.com/berarma/oversteer which says it works with your wheel once you also add this module: https://github.com/gotzl/hid-fanatecff

Fanatec Wheels, Probably the biggest update in 2021 we had, there is now a community driver on Github https://github.com/gotzl/hid-fanatecff That has the elite and sport working and appears to be experimental with the DD setups. I do not have a fantec wheel to test this.

The CSL DD has experimental support with this driver https://github.com/gotzl/hid-fanatecff

I'm using the CSL: DD, Logitech shifter and clubsport v2 pedals, there is support at the moment for the CSL DD https://github.com/gotzl/hid-fanatecff but it's experimental and some games don't work right now like the f1 games and beamng and I use simhub for my dashes which isn't on linux. so sadly there isn't much for linux options in my case.

Not completely true. There exists a driver for Thrustmaster T300: https://github.com/Kimplul/hid-tmff2 Other wheels I also have seen supported are some fanatec wheels: https://github.com/gotzl/hid-fanatecff

If your wheel pedal and shifter is of the Fanatec kind, there is a driver on github.