pyLinuxWheel VS t150_driver

According to the readme, if we don't want to run with sudo we can put 99-logitech-wheel-perms.rules file into /usr/lib/udev/rules.d/ ourselves (you will need to sudo steamos-readonly disable before copying that, so probably expect it to break post-update). As far as I can tell that's the only thing it actually needs root permissions for.

Ubuntu 20.4 - Works out the box, confirmed with pyLinuxwheel and oversteer , 'Dirt' and 'Dirt 4' (native games)

PyLinuxWheel: Logitech steering wheels (DFGT, DFPRO, G25, G27, G29 and G920) have good support in our system. With this utility we can easily change the degrees of rotation.

PyLinuxWheel: Currently it supports a lot of Logitech Steering Wheels (from very old Steering Wheels like WingMan Formula to newer like G29 and G920) , it has more functionalities like set Force Feedback, combine pedals, export and import profiles, test pedals, set range, etc. Also, it is very easy to install as it has Appimage and deb packages.

-PyLinuxWheel by u/OdinTdh : https://gitlab.com/OdinTdh/pyLinuxWheel

I would not bother. There's an unofficial driver for linux but it looks like it only partially supports force feedback. Force feedback is the only reason to use a wheel in the first place.

So, I'm basically trying to make my Thrustmaster TMX Pro work under Fedora 36. I already tried using [tmdrv](https://github.com/her001/tmdrv) with [scarabuto's T150 driver](https://github.com/scarburato/t150_driver) and [emtek995's TMX / TMX Pro driver](https://github.com/emtek995/TMX-driver). With both ways nearly everything is workig except the calibration with jscal, which shows the Axis to be about 30000, instead of the correct 60000 large. As a result I have a weird deadzone of about 20° in every direction from the center. In Windows everything works fine.

I was struggling a while back with these drivers, but couldn't make it work. Specifically I use Thrustmaster T150, so might be that my model isn't supported

t150_driver

I have a thrustmaster T150 steering wheel for my PC, and I installed a driver from this github page, and it worked right away when I launched euro truck simulator 2 in the native version. But becasue I found out that the native version has significantly worse performance than proton and it didn't support vkBasalt, I switched. When I launched ETS2 with proton, it was not detected anymore.

There are kernel modules for other Thrustmaster wheels such as the T150 and T300RS but not the T80, unfortunately.

-Thrustmaster T150 with T150_driver

I'm successfully using t150_driver with my Thrustmaster T150 in Eurotrucks 2 on Linux (Ubuntu 20.04).

you should reply directly to the user so I get a notification when you respond, I only noticed this post by chance. Anyways something like this should work https://github.com/scarburato/t150_driver/blob/master/files/etc/udev/rules.d/10-t150.rules but you will have to replace the name/model id/vendor id with the appropriate ones, I'm surprised that tmdrv doesn't have an example rule

If you own a T150 or T300RS Thrustmaster wheel, you have this drivers: https://github.com/scarburato/t150_driver