pico-debug VS pico-examples

There's also apparently a way to use the other core of a Pico as a debug programmer: https://github.com/majbthrd/pico-debug/ but that's pretty advanced.

This blog pot continues the Pico setup series and will detail how to setup a fully working debugger in VS Studio Code. Keep in mind that ultimately the steps are based on explanations from pico-debug project, and wizio-pico, but the setup is complex so I wrote a summarizing blog article. Follow along and you will be debugging your Pico C programs with the press of a simple launch button.

Navigate to the Pico Examples repository.

I'm experimenting with the "pico/wifi/tcp_server/". It works as expected with a WPA2 secured network, however I can't figure out how to access a WP3 secured network. According to the Pico W datasheet the device supports WPA3. However the function cyw43_arch_wifi_connect_async doesn't seem to have the option to select WPA3. The supported options are CYW43_AUTH_WPA_TKIP_PSK, CYW43_AUTH_WPA2_AES_PSK, or CYW43_AUTH_WPA2_MIXED_PSK.

I connected the MPU6050 and Pico as shown in the wiring guide for the example code here and have also tried using a level shifter with this wiring setup.

https://github.com/raspberrypi/pico-sdk/ links to a PDF about connecting to the interwebs with a pi pico.

micropython/micropython//ports/rp2/boards/RPI_PICO_W: https://github.com/micropython/micropython/tree/master/ports...

raspberrypi/pico-sdk /lib: btstack, cyw43-driver, lwip, mbedtls, tinyusb https://github.com/raspberrypi/pico-sdk/tree/master/lib

raspberrypi/pico-examples//pico_w/wifi/access_point/picow_access_point.c:

https://github.com/raspberrypi/pico-examples/blob/master/pic...

There's an iperf opkg pkg, or is it just netperf (which works with fluent)?

raspberrypi/pico-examples//pico_w/wifi/iperf/picow_iperf.c:

Okay I abandoned both of those libraries and tried the simpler WS2812 example in the Pico SDK and I did get it working....finally.

For C++, you could look at the pico-examples on Github https://github.com/raspberrypi/pico-examples

I don't know what you mean. There are dozens of tutorials on the frontpage of google. And just straight up a bt folder of projects for the pico w in the rpi github at https://github.com/raspberrypi/pico-examples/tree/master/pico_w/bt. have you tried that? If you haven't, then you need to work on learning how to use google because people aren't here to do work for you. If you have tried this and it didn't work then reread my previous post and ask better questions.

I'm sorry I don't use the pico-sdk so I'm not 100% sure of which method it'd be. A short lookup in the pico-examples repository brought me to this.

The LED is controlled by a GPIO pin on the radio, not the RP2040. See https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/blink/picow_blink.c.