openrgb-rs VS FanControl.Releases

I don’t think you need any special software for the cooler, CAM just handles the RGB and I think the display on the block. If you can live without that (OpenRGB can potentially handle the RGB, not sure about the display) then you should be able to get rid of it (assuming NZXT let you uninstall it without needing a reinstall, unlike Asus and Armory Crate…).

openrgb.org and get rid of Mystic lights

openrgb.org works on all 3 of my MSI boards, Razor KB and mouse too. Small and simple.

You can try SignalRGB or OpenRGB

If you've connected the ARGB Header to your Motherboard, you'll have to use some software like OpenRGB, but if not - try pressing the "Reset" button (located on the left-hand side of the Front Panel) which hopefully will switch between RGB modes.

First install OperRGB https://openrgb.org/

Controlling RGB devices on Linux has always been kinda finicky. Too much proprietary nonsense and Windows-only software. With so many vendors jumping on this open standard would it potentially open up way more devices to be controlled by one app on Linux? Would a project like OpenRGB be able to get this working? I'm not a developer, so apologies if this ultimately means nothing.

You could try OpenRGB and see if it detects and allows you to change your lights.

- OpenRGB: Control all of your RGB devices from a single app (no online accounts required)

Do you have this ARGB cable connected to the motherboard? If yes, you can use OpenRGB to control it.

You don't really need PID, just a decent fan curve with https://github.com/Rem0o/FanControl.Releases

I think you're looking for FanControl https://github.com/Rem0o/FanControl.Releases There is a bit of initial setup but nothing crazy, and it guides you through with a nice and clean UI. Once you're in, you can set your fan curve and all the smaller details if you want, like how long will the fans take to spin up or spin down, or how long to delay a speed change after hitting a certain temperature threshold so that its not constantly revving up and down

You could even replace all the fans with Noctua nf a12s and control using this and still have saved money: https://github.com/Rem0o/FanControl.Releases

MSI Afterburner should work for gpu fans. Motherboards typically have their own version of software for fan control, so you could use that (dl from mfg website), or there's this one that I know of that should work for any mobo (although there's probably others): https://github.com/Rem0o/FanControl.Releases

If your fans are heywire, draining your bats download fan control. Works great.https://github.com/Rem0o/FanControl.Releases

I've seen a lot of reccs pointing to https://github.com/Rem0o/FanControl.Releases if you don't want to stick with your BIOS to control fans.

Being a Corsair PSU, you might be able to control the fan curve with this open source fan software

This app relatively the same feature, but is not open source and run only on Windows