nbfc-revive VS nbfc-linux

The closest I've gotten to successful control is by using the nbfc-revive fork of NoteBook FanControl (https://github.com/UraniumDonut/nbfc-revive) by following these steps:

For laptops there's nbfc or its rewrite nbfc-linux.

One other idea, https://github.com/UraniumDonut/nbfc-revive

I got rid of NitroSense and installed NBFC instead. (https://github.com/UraniumDonut/nbfc-revive) Fans go on when they should and off when they should. You know the laptop's very hot when NBFC ramps up the speed to the max as soon as Windows boots up.

If it came with Windows 11, stay with Windows 11 unless you have a product key for Windows 10. Windows 11 garbage right now, but it'll catch up soon. Don't worry about undervolting. Just set your power plan to 99%. If you remove NitroSense and replace it with NBFC (https://github.com/UraniumDonut/nbfc-revive) you'll be golden.

Change your power settings to use 99% of the CPU. Also make sure you're using Notebook Fan Control. https://github.com/UraniumDonut/nbfc-revive

There's also a fork of it with more updates, since the other tool wasn't updated for quite some time: https://github.com/UraniumDonut/nbfc-revive

I understand that some people want to avoid the CC at all cost. It might reduce battery life and it's a crappy peace of software in general. The Notebook Fan Control project got revived and it seems that in the next couple of days an update might be included that will support the 11800H. This would allow you to control the Fans without the CC. Some people uninstall CC completely (and lose the OSD, Keyboard Color Control, Power modes and thus the ability to raise the GPU Power limit), some have it autostart and kill it. If you write a script for that which kills CC on login and starts NBFC, this could be comfortable and you might keep the OSD. Also you could choose Turbo Mode and kill your CC afterwards. https://github.com/UraniumDonut/nbfc-revive

Does this work for every laptop, or just tuxedos? I'm currently using nbfc linux

For laptops there's nbfc or its rewrite nbfc-linux.

https://github.com/nbfc-linux/nbfc-linux, it's serving me well

Obviously replace Your Laptop Model with your actual laptop model, from this list https://github.com/nbfc-linux/nbfc-linux/tree/main/share/nbfc/configs

https://github.com/hirschmann/nbfc I've used this in the past. The only part I don't like is it uses Mono, although it worked fine for me. There is also a linux port for this : https://github.com/nbfc-linux/nbfc-linux, but I'm having trouble with it.

sorry I'm not much of a hardware guy at all, so that lspci output is kind of alien to me... could the Serial Controller have anything to do with the fan...? btw, I forgot to mention that while I cannot get the fan speed in rpm, I could control it with nbfc-linux by using the pre-made profile for either the 8460p or 8460w iirc, on Artix Linux. Fairly recently made a clean install of Mint, though. Thanks for your help!

git clone https://github.com/nbfc-linux/nbfc-linux.git cd nbfc-linux make && sudo make install

Exactly! I use config for Acer Predator G3-572. If that won't work just try some Acer configs it shoud work. Here's the github repo for nbfc-linux: https://github.com/nbfc-linux/nbfc-linux