qmk_firmware VS pico-examples

I had trouble with HMR as well at the beginning, but since switching to sunaku's fork/PR I've almost eliminated all the issues I had with it. And worth mentioning is urob's timeless HMR config from which I think the fork/PR takes some of its inspiration.

Affirmative. I updated my fork and my clone last week. I also did a second, fresh clone and merged this PR: https://github.com/manna-harbour/qmk_firmware/pull/56

Im guessing installing something like this is what i need to do? https://github.com/manna-harbour/qmk_firmware/pull/56

See my Miryoki PR for details: https://github.com/manna-harbour/qmk_firmware/pull/56

I have a separate system for that as part of this old unreleased project. They're orthogonal so could be used together, but it'd be nicer if they were integrated. If you just want to remap buttons or map buttons to keys you can do that in the OS.

Well, things like Bilateral Combinations are aware of which hand is using the modifier to only apply it to the other side's presses & minimise accidental triggering on same-hand rolls.

Navigate to the Pico Examples repository.

I'm experimenting with the "pico/wifi/tcp_server/". It works as expected with a WPA2 secured network, however I can't figure out how to access a WP3 secured network. According to the Pico W datasheet the device supports WPA3. However the function cyw43_arch_wifi_connect_async doesn't seem to have the option to select WPA3. The supported options are CYW43_AUTH_WPA_TKIP_PSK, CYW43_AUTH_WPA2_AES_PSK, or CYW43_AUTH_WPA2_MIXED_PSK.

I connected the MPU6050 and Pico as shown in the wiring guide for the example code here and have also tried using a level shifter with this wiring setup.

https://github.com/raspberrypi/pico-sdk/ links to a PDF about connecting to the interwebs with a pi pico.

micropython/micropython//ports/rp2/boards/RPI_PICO_W: https://github.com/micropython/micropython/tree/master/ports...

raspberrypi/pico-sdk /lib: btstack, cyw43-driver, lwip, mbedtls, tinyusb https://github.com/raspberrypi/pico-sdk/tree/master/lib

raspberrypi/pico-examples//pico_w/wifi/access_point/picow_access_point.c:

https://github.com/raspberrypi/pico-examples/blob/master/pic...

There's an iperf opkg pkg, or is it just netperf (which works with fluent)?

raspberrypi/pico-examples//pico_w/wifi/iperf/picow_iperf.c:

Okay I abandoned both of those libraries and tried the simpler WS2812 example in the Pico SDK and I did get it working....finally.

For C++, you could look at the pico-examples on Github https://github.com/raspberrypi/pico-examples

I don't know what you mean. There are dozens of tutorials on the frontpage of google. And just straight up a bt folder of projects for the pico w in the rpi github at https://github.com/raspberrypi/pico-examples/tree/master/pico_w/bt. have you tried that? If you haven't, then you need to work on learning how to use google because people aren't here to do work for you. If you have tried this and it didn't work then reread my previous post and ask better questions.

I'm sorry I don't use the pico-sdk so I'm not 100% sure of which method it'd be. A short lookup in the pico-examples repository brought me to this.

The LED is controlled by a GPIO pin on the radio, not the RP2040. See https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/blink/picow_blink.c.