dactyl-keyboard VS keyboard-pcbs

I printed a hot swap compatible case from files generated using this repo from Wylder Builds. The sockets fit pretty well without glue, but not all are tight enough to never pop out. Depends on your print tolerances (mine are okayish).

Regarding trackball and thumb cluster variants of a Dactyl ManuForm: wylderbuilds github has pretty much the majority of, if not every, Dactyl ManuForm thumb cluster and trackball thumb cluster variations.

https://www.etsy.com/shop/Wylderbuilds is a place I've used in the past. They sell parts and completed keyboards, but also have a link out to github with their modifications, at https://github.com/bullwinkle3000/dactyl-keyboard. The whole dactyl space is definitely a rabbit hole, though.

There's examples of dactyl manuform cases with trackball housing (example GitHub repo), though the circular display is going to be a design topic in itself. Most likely the display protrudes from the upper inner side of case slightly, like a sky scraper roof top Helipad 😋

If you preferre python goto https://github.com/joshreve/dactyl-keyboard or https://github.com/bullwinkle3000/dactyl-keyboard

In the repo for the royals there is a folder called 'gerber' which contains the files...

For the Amoeba Royal, first clone the repo: https://github.com/mtl/keyboard-pcbs/tree/master/amoeba-royale, then zip up the gerber folder and upload it to your PCB manufacturer of choice. I used jlcpcb and you can find the settings I used here: . Note that I ordered 5 panels of 10x5 pieces, so I ended up with 250 pieces. You may want to adjust accordingly. Btw the pinout reference for wiring is also in the same directory.

You can get the gerber files from This repo and get them really cheap from jlcpcb or other pcb services.

The thumbs are the "famous" github

They look like an Amoeba 1.5.

Or search for https://github.com/mtl/keyboard-pcbs or amoeba king or