airspy-fmradion VS sample-icecast-noaa

I have a little hobby project where I record an FM radio music station using a SDR and then remove all the non-music portions for offline listening. I like the music selections the DJs pick, but I prefer not to listen to the DJ commentary and the advertisements.

I evaluated three methods of recording: analog capture from a standalone FM receiver, using this nrsc5 library to record the "HD" radio stream, and using an AirSpy SDR with this library: https://github.com/jj1bdx/airspy-fmradion

Recording the "HD" (what a misnomer) radio was nice in that there was no hiss or multipath effects, but in comparison to the other methods the digital compression artifacts became impossible to un-hear. It seems to top out at about 96 kbps

The airspy-fmradion library has some nice stuff in it to address multipath, resulting in the best audio quality of the three methods I tested.

I use https://github.com/ina-foss/inaSpeechSegmenter to identify which segments of the recordings are speech vs. music.

Alternatively, use airspy-fmradion:

You might want to look into using https://github.com/jj1bdx/airspy-fmradion instead of rtl_fm for stereo.

You can use https://github.com/windytan/wfm-tools together with rtl_fm to get stereo, though I prefer https://github.com/jj1bdx/airspy-fmradion

Sample is here: https://github.com/zacs/sample-icecast-noaa

Finally, if you want to not do any of that, I pushed up a more complete sample Docker config here. That one will stand up both Docker images (one for rtl_fm and one for Icecast) and should do everything for you. Just clone the repo and update the config files (passwords, your internal IPs, etc).