airspy-fmradion VS ezstream

I have a little hobby project where I record an FM radio music station using a SDR and then remove all the non-music portions for offline listening. I like the music selections the DJs pick, but I prefer not to listen to the DJ commentary and the advertisements.

I evaluated three methods of recording: analog capture from a standalone FM receiver, using this nrsc5 library to record the "HD" radio stream, and using an AirSpy SDR with this library: https://github.com/jj1bdx/airspy-fmradion

Recording the "HD" (what a misnomer) radio was nice in that there was no hiss or multipath effects, but in comparison to the other methods the digital compression artifacts became impossible to un-hear. It seems to top out at about 96 kbps

The airspy-fmradion library has some nice stuff in it to address multipath, resulting in the best audio quality of the three methods I tested.

I use https://github.com/ina-foss/inaSpeechSegmenter to identify which segments of the recordings are speech vs. music.

Alternatively, use airspy-fmradion:

You might want to look into using https://github.com/jj1bdx/airspy-fmradion instead of rtl_fm for stereo.

You can use https://github.com/windytan/wfm-tools together with rtl_fm to get stereo, though I prefer https://github.com/jj1bdx/airspy-fmradion

This does assume a few things: 1. That you've installed `rtl-sdr`, `lame`, and `ezstream` packages. 2. You have an /etc/ezstream.xml, as specified [here](https://github.com/xiph/ezstream/blob/develop/examples/ezstream-minimal.xml). 3. That you are running an Icecast server. Icecast itself has a well-maintained Docker image. If you're unfamiliar with Docker, the [official docs](https://docs.docker.com/engine/install/ubuntu/) are good on setting it up, but remember to also [install compose](https://docs.docker.com/compose/install/). I use the following in my `docker-compose.yaml` to host it on Ubuntu:

This does assume a few things: 1. That you've installed rtl-sdr, lame, and ezstream packages. 2. You have an /etc/ezstream.xml, as specified here. 3. That you are running an Icecast server.