Wireless-USB-OC-Big-Sur-Adapter VS Wireless-USB-Big-Sur-Adapter

We have WiFi with the use of a third party TP Link dongle and chris1111's Wireless USB OpenCore Adapter, fully functional trackpad with gestures with the help of BigSurface. Also have touchscreen & stylus working with SSDT-SURFACE although do not use it*

I got the t3u, had to get https://github.com/chris1111/Wireless-USB-OC-Big-Sur-Adapter to get it to work

I found two solutions. The first is a kext named "BlueToolFixup.kext" (https://github.com/acidanthera/BrcmPatchRAM) to make the UB400 work on higher versions. The second solution is a program that makes wireless USB adapters functional even though no drivers were available from the manufacturer (https://github.com/chris1111/Wireless-USB-OC-Big-Sur-Adapter/releases/tag/V16).

try this

You could get something like a wifi dongle online and then use chris1111 wireless USB drivers.... you have to disable SIP in recovery, set SecureBootModel to disabled and disable gatekeeper when installing the drivers though. But once that is done, you should have working wifi. I too use this and have a really cheap and random wifi USB dongle attached which I use for my Hackintosh and the Windows install on my system

Wireless-USB-OC-Big-Sur-Adapter

I know you can get wifi with a sub compatible with this https://github.com/chris1111/Wireless-USB-OC-Big-Sur-Adapter drivers but also please check https://dortania.github.io/Wireless-Buyers-Guide/types-of-wireless-card/usb.html first.

Perhaps this could be the solution to your problem. https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter .But in any case, I advise you to search the Internet for some information.

I have a tp-link archer t3u plus and I use this https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter

Your wifi card isn’t natively supported but if it happens to have a realtek chipset which is usually the case with TP-Link cards you might wanna try installing this driver. Otherwise, you can get a fenvi broadcom card for native support.

So i had a working Hackintosh made by a friend a long time ago (I have 0 knowledge about this stuff, but I do understand some basics). Later he upgrade some parts; Gigabyte Z390 mobo, some extra ram + Intel Core i7 9700K It worked like a charm but the wifi didn't work. Hence i always used it with lan cable. Now i moved and the lan socket there wasn't working. the pci network card inside never worked, so i thougth i just buy a ac1300 Tp usb adapater for wifi, instead of installing the drivers that people recommended using this usb dongle ( https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter) I ended up downloadin' the original one, And you guessed it, now my hackintosh doesnt boot, and it gives me this screen.

For the software you can look it up from here (https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter) and here (https://github.com/chris1111/D-LinkUtility-Package)

I've found this try if you have the V2

Have a look here. This is a driver to use Realtek chips on the latest versions of macOS. There's a list of working adapters on the page. Very likely this only works with Intel macs.

I tried using these instructions: https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter. I would get through everything, but when I had to reboot to finalize the installation, it never worked.