Skeleton-Dactyl-Mini VS Dactyl-It-Yourself-Editor

If you have access to a 3D printer, I would recommend handwiring a Skeletyl or Scylla.

if you are looking for a sculpted/keywell design I would start with something like the https://github.com/sanderboer/chonkybois or https://github.com/Bastardkb/Skeletyl then work on refining your needs from those ideas.

There's these made by Quentin, which can be mirrored for Skeletyl/Cnano.

Awesome. Do you think single-key RGB would be an issue? Would it add too many cables? I'm currently looking at the Skeletyl, but am intimidated by the four additional cables per LED.

If you have access to a 3d printer you could print something like a skeletyl or a dactyl manuform and then handwire it with some diodes and wires. That's the cheapest way I can think of.

I'd throw BastardKBs Keyboards into the mix as well as he's open sourcing all of his designs, for instance the Skeletyl or the Charybdis

You can take a look at the Skeletyl. It's a 5x3+3 design. Basically the upper three thumb keys of the one you posted and with 2 keys less on row 3 and 4.

a printed, blue Skeletyl

But I've been building keebs for a few years now, and I gotta cut back :-P The biggest issue is it takes forever to print a shell to 'test fit' it. It would actually be cool if you could print the shells upside down so you don't have to print the whole thing to see how it feels.

Oh! looks like there's a OpenSCAD parametric dactyl now (1) I think this was the clojure one I was playing with before: (2)

1: https://github.com/pseudoku/Dactyl-It-Yourself-Editor

2: https://github.com/l4u/dactyl-manuform-mini-keyboard

Link to Miniwarp https://github.com/pseudoku/Dactyl-It-Yourself-Editor/blob/master/Things/MiniWarp.stl

I used Dactyl-It-Yourself-Editor to create the base model. Further heavily modified in Fusion360.

The original Hypo Warp is all MX based and it is available on github. So you can use that one instead.

Thanks, the board is a MiniWarp by Pseudoku. The stl is in their github repo