OpenCore-Install-Guide VS AppleALC

Check dortania’s open core guide

To keep costs down, Keep an eye on local market place and classified sites for a cheapish gaming PC with an AMD card in it (RX’s 5700 / 5700xt / 5600xt / 6600xt / 6600). Look up the parts here on Reddit and https://dortania.github.io/OpenCore-Install-Guide/ to see if people have problems or methods needed to make them work.

Idk much about amd gpu support but u can check it on Dortania’s open core guide which I highly recommend you to follow

Btw u can follow this https://dortania.github.io/OpenCore-Install-Guide/

I have similar setup (i7 8700K, 5700XT, Asus Prime Z370-a), everything works, no issues (wifi with OCLP patches). All you need is here: https://dortania.github.io/OpenCore-Install-Guide/

Go through the Dortania Guide.

I exclusively used OpenCore Dortanias Guide. I also useed OC 0.9.5

Conexant CX20724 ISST Audio - AppleALC, , layout ID 13

https://github.com/acidanthera/AppleALC/wiki/Supported-codecs set alcid accordingly

I don't. Have you looked at the AppleALC wiki to see which IDs that might need? https://github.com/acidanthera/AppleALC/wiki/Supported-codecs

I have a Comet Lake laptop (i7-10510U & UHD 620) with the ALC294 Audio Card. I've tried all of the layout ID's listed on https://github.com/acidanthera/AppleALC/wiki/Supported-codecs. But all of them sound the same. I'm also using macOS Monterey... Any fix?

Do not enter the digits of your audio codec as your alcid. For example: "alcid=298" (ALC298). Use appropriate alcids from the AppleALC wiki: https://github.com/acidanthera/AppleALC/wiki/Supported-codecs

CPU: Intel Core i5-10500H (Comet Lake) [CPU slightly undervolted within BIOS] GPU: Intel UHD 630 (+ NVIDIA GeForce 1650 with Max-Q Design that's disabled via ACPI and boot-args) RAM: 12 GB Motherboard/Laptop Make and Model: MSI GF63 Thin 10SXCR Audio Codec: ALC223 Ethernet Card: RTL8111HS-CG Wifi/BT Card: Intel 802.11ax Wi-Fi 6 + Bluetooth v5.1 Touchpad and touch display devices: HID-Compliant Touchpad (Used VoodooI2C for touchpad) BIOS revision: -

Use linux to find out your audio codec (ALC...) and use this to narrow down the layout ids you could use. Try all of them and see which one works. Good luck!

So..i have a Lenovo Legion 7i Laptop with Realtek ALC287 audio codec, i've used layout-id 11 and 21, (21 seems to be better, since an internal and external mic device seems to be appearing on the System Preferences) however, although slider, volume, works...i still got no audio (both input and output), been surfing around and got to this link : https://github.com/acidanthera/AppleALC/wiki/Dumping-processing-coefficients