OctoPrint-PSUControl VS OctoPrint-TPLinkSmartplug

Replying to my other comment about the logs: Try enabling logging as detailed on the PSU-Control github. (I enabled both 'psucontrol' and 'psucontrol-tplink' to "debug" level).

Thanks for pointing me towards plugins. Didn't realize those would have the power to cause that kind of issue. Looks like it's probably my Home Assistant PSU Control plugin. Lots of error spam from it in my logs, and I found this issue: https://github.com/kantlivelong/OctoPrint-PSUControl/issues/262

Same. I use a TP-Link KP303 strip with the PSU Control plugin on OctoPrint. It cuts power 10m after the hotend and bed cool to 50c.

A few days before going the Home Assistant route I had installed the PSU Control plugin to be able to turn it off/on. It worked, but I thought it would be easier if I managed it with Home Assistant as it gave me many more options for including several conditional checks. Not to mention if I wanted to adjust the logic it was much quicker/easier to edit Home Assistant automations than to have to edit the plugin settings each time and hope I didn't screw it up.

Also, if you're willing to play with some wire cutters you can use a plugin for OctoPrint to turn on/off your 3D printer directly from the OctoPrint web interface. (Although if you go with the docker container you'll need to pass through GPIO control for this to work by mounting /dev/gpiochip0).

EDIT: this plugin https://plugins.octoprint.org/plugins/tplinksmartplug/ based on the more generic power control plugin https://github.com/kantlivelong/OctoPrint-PSUControl

Really need more info about your configuration. With the exception of catching M80/M81(configurable) PSU Control doesn't modify outgoing GCode. Logs also help. https://github.com/kantlivelong/OctoPrint-PSUControl/wiki/Troubleshooting#how-to-provide-logs

I have a tplink socket on my printer so im using the TP-Link Smartplug plugin and iv got it configured with as:

My TP Link HS103 stopped working with Octoprint likely as a result of the recent firmware update. And what's weird is that there is a workaround to get the HS103 working again with the TPLinkSmartPlug plugin, which I followed. Octoprint started controlling the smart plug again - yay! But it stopped working again after a while. Boo. :(

2022-01-07 17:16:28,821 /home/pi/oprint/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpy9sw1vew/Octoprint-Smart-Filament-Sensor-master.zip --no-cache-dir pip install "https://github.com/jneilliii/OctoPrint-TPLinkSmartplug/archive/master.zip

The P100 seems to be known to not be able to function at all: https://github.com/jneilliii/OctoPrint-TPLinkSmartplug/issues/131

I want to use this plugging for octoprint: https://github.com/jneilliii/OctoPrint-TPLinkSmartplug But i have fluid, is it possible ? I installed fluid after Nero's 3D video : https://youtu.be/gfZ9Lbyh8qU

I use this one: https://github.com/jneilliii/OctoPrint-TPLinkSmartplug It should be available from your octorpint dashboard, that's how I downloaded it a year ago. Best upgrade ever, I can leave prints overnight and when they're done the printer and a light connected to it turn off automatically after cooldown.

Follow the setup instructions on the main plugin page for inputting your plug's IP address. Make sure "Enable GCode Trigger", "Auto Connect", and "Auto Disconnect" are checked on.