Mini-AfterSherpa VS KP3s-coreXZ

Does anyone have a mini-after-sherpa with a phaetus dragonfly 55W heater hotend config?

I printed a mini aftersherpa from the github and it says everything is 3010 and 3007 fans. There's also many different remixes, mods, adaptations, etc. of the mini-after-sherpa hotend fan-shroud thing...

There's this one which is popular but pretty much the same as stock just with the top cut off. https://github.com/PrintersForAnts/Mini-AfterSherpa

If you're dead set on changing things up, the two (relatively) minor mods I'd suggest are the Mini-AfterSherpa toolhead and ZeroPanels panel clips. These will save you from dealing with the hassle of assembling a Mini-AfterBurner (my least favorite thing about V0.1), and inserting a million captive nuts, respectively.

I used the mount from https://github.com/PrintersForAnts/Mini-AfterSherpa. It requires 5V, then the gpios on the pi. I ended up going with an MGN9C and mini sherpa. The weight seemed to cause a drop but didn't test after the MGN9C upgrade

Sherpa Mini Extruder from Fabreeko with 8GT motor and Mini Aftersherpa. I found this easier to service than the mini afterburner

MiniAfterSherpa Toolhead with Revo Micro

I'm not entirely sure I understand your question but https://github.com/PrintersForAnts/Mini-AfterSherpa might be the answer

In my opinion the Mini AB is terrible. I have the mosquito running with a Sherpa Mini extruder and cowling of my own design. But the mini after sherpa works ok. If you can't find another cowling that works, I could modify mine so it fits the larger mosquito. There are other designs out there like the V0VO

I did the AfterSherpa mod with a standard V6 and mini-Sherpa because:

Github is here

I'm just starting the wiring on a little corexz but it is small (180mm^3) so I'm planning to use bed_screws_adjust with no probe. As long as your motors are all moving correctly then it is either a probe issue or possibly you didn't correctly define the print volume/build space? (bed size)??

I'm about halfway through a kp3s 'halfwire' build/mod and wondering about reliability of switchwire (and halfwire) printers. I started the project for fun thinking it would be a second, third, fourth printer in the lineup but my normal go-to printer for quick parts is starting to die. It's a little 150x150 cantilever bed slinger that prints a little more than one spool of pla+ per week.

I honestly just discovered this yesterday after wanting to take a closer look at a 3d printer design on github. The guy posted a 55mb monster step file. I opened it in Assembly 3, found what I wanted and just started deleting the rest. That's when I discovered the real depth of what is possible with Assembly 3. The guy's file has many parts and revisions that were not visible and hundreds of parts, like a whole library built into the step file. If you're stuck behind Windows get the linux subsystem running just to try it out. I've tried the different assembly workbenches but struggled to figure out the workflow effectively. Seeing the whole thing backwards after importing a file is much more clear. There is a special A3 import button that you use. This was the file I used: https://github.com/jomettler/KP3s-coreXZ/blob/main/CAD/KP3s_CoreXZ.step