GenSMBIOS VS kext

Most likely you don't have any serial number bound to that VM. You can generate a SN with this script by typing your Mac model

Name: BOARD_SERIAL Key: BOARD_SERIAL Value: [Generate via GenSMBIOS](https://github.com/corpnewt/GenSMBIOS)

Is your SMBIOS configured properly ? Use Corpnewt’s GenSMBIOS Also, you may create a separate account on your hackintosh to do this.

Looks like you're trying to use a "Configurator" utility in your video.Most likely part of your problem. Not any part of them are supported around here. Try GenSMBios or just manually enter it in your config.

OpenCore 0.8.7 / Dumping DSDT use SSDTTime for generate ACPI Tables / Use genSMBIOS for generate MLB (Board Serial), ROM (Mac Address), SystemSerialNumber (Serial), SystemUUID (SmUUID)

if you have/did a proper SMBIOS injection, nothing happens, it's just like you have a real mac. Just avoid changing your SMBIOS abruptly (if ever) with your account logged in, best to log out and try new SMBIOS. For better SMBIOS injection I recommend you to use "GenSMBIOS". In my case, all services always work on the first try.

Not necessarily at the moment, after installation (if everything is ok - I hope so), you can do it with https://github.com/corpnewt/GenSMBIOS

do you have both USBToolBox.kext and UTBMap.kext? you need both USBToolBox.kext and UTBMap.kext for USBToolBox to function. https://github.com/USBToolBox/tool https://github.com/USBToolBox/kext

https://github.com/USBToolBox/toolhttps://github.com/USBToolBox/kext

Output from usb mapping is UTBMap.kext. Then you add USBToolbox.kext

If you have access to windows, this is a good usb mapping script. https://github.com/USBToolBox/kext. Heaps of guides around.

USBtoolbox, UTBmap

Do the usb mapping with USBToolboxadd Toolbox.kext too

Next, head here (https://github.com/USBToolBox/kext/releases)

Before you install OSX on the target machine, install Windows 10 or Windows 11 first. Make sure that ALL of your drivers for Windows 10 or 11 are installed (especially your chipset drivers). Use the Windows version of USBToolBox, and map your ports per their instructions (basic instructions are on the same page with the utility). Grab that here: https://github.com/USBToolBox/tool. Run the Windows.exe version (your antivirus software will go nuts trying to run this on your machine, either allow it, or rename the executable after unpacking it). Copy the created kext (called UTBMap.kext) file this program creates onto a separate flash drive to use after MacOSX is installed. Next, head here (https://github.com/USBToolBox/kext/releases), and grab the two kexts (USBToolBox.kext and UTBDefault.kext) within the zip file. Unpack, and put them in your EFI/OC/Kexts folder on your bootable USB drive. Use ProperTree to open the config.plist on your bootable drive, do an OC Clean Snapshot (this updates the config.plist with the new kexts you added), and SAVE.