EnragedRabbitProject VS klipper

Maybe read the docs: https://github.com/EtteGit/EnragedRabbitProject/tree/main/Documentation

EnragedRabbitProject

Personally, I've almost driven myself nuts in getting ClockWork2 to work reliably ever since it was made public but was never satisfied due to it seemingly not coping well with the increased friction coming from my use of an ERCF as part of my System.

For single extruder multi-material like the Prusa MMU, there is the Enraged Rabbit Carrot Feeder: https://github.com/EtteGit/EnragedRabbitProject

I'm not entirely sure on that either. The Enraged Rabbit Carrot feeder seems to have almost all of the AMU's secret sauce (with the exception of the single multispool drive unit on the ERCF vs the AMU's multiple independent ones). In all honesty if Bambu was going down this route I would have preferred they leaned in on their proprietary motor control hardware (h-bridge and in house firmware) vs the industry standard TMC derived controller hardware. I think that the situation of having 20+ of the worlds 26 3d printer companies within the same metro area in a country that has the most loosy goosey state industrial/disaster capitalism model in human history is going to get us (in our corner of the world) in some serious s^$#.

You should print the calibration part here : https://github.com/EtteGit/EnragedRabbitProject/blob/main/Carrot_Feeder/Stls/Tools/Calib_Test.stl

https://github.com/EtteGit/EnragedRabbitProject/blob/no_toolhead_sensor/Documentation/ERCF_Manual.pdf page 116 shows the correct configuration for SuperSlicer. What slicer are you using?

Owning both I'd say there's no reason to be concerned about reliability being an issue - At least not without also incorporating an ERCF into the Mix which may give some frustrations at times ( I highly recommend going with the Happy Hare Software Suite instead of the default one ).

Hi, As the title suggests, has anyone got this working successfully? I'v tried using the firmwares from https://github.com/SteveGotthardt/klipper/releases

The only thing that is different is on the board version I have 1.0.2 were https://gist.github.com/SteveGotthardt/2ed249f197f5928eaf5c3d3877d55503 is version 1.0.3

Trying to use the firmware avilable HERE but neither the O1 or the C2 firmware are working.

I used this Firmware from: https://github.com/SteveGotthardt/klipper/releases and wrote my own printer.cfg.

Yes and no. There is already some information and maybe guide? about how to run Klipper on the kobra. Since the kobra has exactly same mcu with the kobra go you can use the same repo. The firmware install procedural should be same, but you need a different printer.cfg https://gist.github.com/SteveGotthardt/2ed249f197f5928eaf5c3d3877d55503 Maybe this can help you.

Next step - klipper firmware. You can clone https://github.com/SteveGotthardt/klipper and make config yourself - kobra is in it's working sub. Second option: use my compiled firmware: https://drive.google.com/file/d/1ZZ3MBFjoGQ3tLOdDsuwpHWBYQDq3HP-p/view?usp=sharing

#git clone --single-branch --branch hc32f460_work https://github.com/SteveGotthardt/klipper.git

I had to follow some of the directions from this build in order to find the right board under "make menuconfig"