klipper VS fluidd

Hi, As the title suggests, has anyone got this working successfully? I'v tried using the firmwares from https://github.com/SteveGotthardt/klipper/releases

The only thing that is different is on the board version I have 1.0.2 were https://gist.github.com/SteveGotthardt/2ed249f197f5928eaf5c3d3877d55503 is version 1.0.3

Trying to use the firmware avilable HERE but neither the O1 or the C2 firmware are working.

I used this Firmware from: https://github.com/SteveGotthardt/klipper/releases and wrote my own printer.cfg.

Yes and no. There is already some information and maybe guide? about how to run Klipper on the kobra. Since the kobra has exactly same mcu with the kobra go you can use the same repo. The firmware install procedural should be same, but you need a different printer.cfg https://gist.github.com/SteveGotthardt/2ed249f197f5928eaf5c3d3877d55503 Maybe this can help you.

Next step - klipper firmware. You can clone https://github.com/SteveGotthardt/klipper and make config yourself - kobra is in it's working sub. Second option: use my compiled firmware: https://drive.google.com/file/d/1ZZ3MBFjoGQ3tLOdDsuwpHWBYQDq3HP-p/view?usp=sharing

#git clone --single-branch --branch hc32f460_work https://github.com/SteveGotthardt/klipper.git

I had to follow some of the directions from this build in order to find the right board under "make menuconfig"

check out Fluidd

Perfect timing to thank to the team behind project Fluidd as well. After some time of inactivity, project has recovered and releasing regular updates, giving us awesome alternative the Mainsail UI.

That’s the fluidd logo in the top left

My recommendation if your just setting up: do yourself a huge favor and do not use OctoPrint. Instead I recommend using Mainsail of Fluidd. They’re both great web interfaces designed specifically for Klipper. Very fast, lightweight and take advantage of all available Klipper functions. Octoprint is very resource hungry.

In the past I used OctoPrint, but now I moved to Mainsail, because it has a better ui and some plugins are directly build in. You can install Kiauh and use it to install Mainsail or Fluidd next to OctoPrint.

You will need a raspberry pi, or an old laptop/pc that is x64. If raspberry pi, you can use either the mailsail or fluidd install image that will configure the entire ui and set up the basics for installing klipper. I’ll link to some videos that can help you if using a pi. Otherwise if using a desktop you will need to install Debian Linux and set up a user named pi and then use a project called kiauh which will allow you to configure mainsail or fluidd.

Personally I prefer Mainsail. But Fluidd is also popular.

Good catch! I've created an issue in GitHub and, once I get consensus on an approach, I'll look at fixing this