Ender_3Pro_Switchwire VS VoronUsers

I assume you mean this correct? https://github.com/walttriano/Ender_3Pro_Switchwire

The Switchwire isn't exactly designed as an upgrade to any existing printer, but there are a couple of decently documented github projects to adapt the Ender, but not necessarily the S1 specifically.

I am looking to convert my E3v2 to Switchwire(SW), but I have some questions about the build, firmware, and slicer setup. Anyone who knows this conversion or has done it, I would love some guidance. I plan to use this or this for the conversion and already have half a stealthburner built. I've also watched assembly vids such as Hyper Makes and Steve Builds.

Check out the Ender 3 Switchwire mods. For example this one or this one. But there are several available mods. Just google it and find the best one for you. Those mods are based on 2020 or 2040 extrusions and should also work with other similar printers. Someone posted a serial request for an Artillery Sidewinder converted into a Switchwire using one of the Ender mods.

I think someone is about to build their first Voron. A Voron Switchwire would be a worthy project.

You could do this to save some money and still get a fast printer.

Mostly Triano's Usermod, a few parts are DaRk_dOg I fixed a few things myself before finding DaRk_dOg, and there's a modified rear motor mount allowing a 48mm e3d high torque stepper

The most printed parts you can use from https://github.com/walttriano/Ender_3Pro_Switchwire/tree/main/STL/Electronics. The skr board is mounted with this https://www.thingiverse.com/thing:5323062. The Rpi mount is from https://www.thingiverse.com/thing:2656426

It's the Stealthburner. This looks like the switch wire mod he's using https://github.com/walttriano/Ender_3Pro_Switchwire

270º Clamping Hinges

Hotend is a Triangle Labs CHC Pro. Extruder setup is a mixture of a couple 😅 -mod of Mantis Toolhead to mount on MGN9C

Stealth skirts by Maverick

Those are a duct remix of this design, it is not yet posted since I need to install my wires to make sure no changes are needed. It will probably be uploaded in the next week.

I'm running a Chainflex umbilical cable + a beacon probe USB cable along the prebowden. I'm thinking about running the Bowden guide to help, I'm not pinching anything when I home the printer, but I'm looking to keep everything up and out of the way. https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Galvanic/Bowden_Tube_Guide

Here is a good cfg to automate the fans

basically copied and pasted from here: VoronUsers/bedfans.cfg at master · VoronDesign/VoronUsers · GitHub with printer specific info bellow

Why don't you submit this to the vetted mods repository? https://github.com/voronDesign/voronusers

I swapped to these magnetic bottom panels and they are awesome!

I noticed that you mentioned being annoyed by the cable management (or lack of it) in the kit, which I think is probably not uncommon with many kits with some exceptions (LDO looks nice). That bothered me also, so I'm also working on something to help with cable management, which may also work with the Trident (a remix of these cable ducts).