Dactyl-It-Yourself-Editor VS void_ergo

But I've been building keebs for a few years now, and I gotta cut back :-P The biggest issue is it takes forever to print a shell to 'test fit' it. It would actually be cool if you could print the shells upside down so you don't have to print the whole thing to see how it feels.

Oh! looks like there's a OpenSCAD parametric dactyl now (1) I think this was the clojure one I was playing with before: (2)

1: https://github.com/pseudoku/Dactyl-It-Yourself-Editor

2: https://github.com/l4u/dactyl-manuform-mini-keyboard

Link to Miniwarp https://github.com/pseudoku/Dactyl-It-Yourself-Editor/blob/master/Things/MiniWarp.stl

I used Dactyl-It-Yourself-Editor to create the base model. Further heavily modified in Fusion360.

The original Hypo Warp is all MX based and it is available on github. So you can use that one instead.

Thanks, the board is a MiniWarp by Pseudoku. The stl is in their github repo

I'll inset M2 nuts using a soldering iron and the screw it in. I also saw an interesting mounting solution on this project, might steal the idea: https://github.com/victorlucachi/void_ergo

Cheapest would be a 3D printed hand wire keyboard. The only expensive part would be the switches and keycaps. The rest would be in the range of Pennie’s to a few dollars. For an ergo, you can look at the V0ID ergo which is designed to be printed and hand wired. You can then use any controller (the cheapest would be a Arduino Pro Micro clone off AliExpress. Yes, it will take time and work to make it but it will be the cheapest thing you can make. You can even look for used mechanical keyboards to get the switches and keycaps from if you want, or look on AliExpress for them.

Hey Everyone! I recently designed and built this keyboard after wanting an ergo mech keyboard and wanting to use the WorkLouder keycaps! I really wanted to make something that would be easy for anyone to replicate so I spent a lot of time focusing on the GitHub page so you can have all the resources available if you want to build one yourself! I would absolutely love to get this board in the official QMK repo so that I can upload the VIA keymap. This would allow anyone who builds this to be able to pop the keyboard in and have VIA load the config automatically. If you have some spare time, I would love some reviews on my pull request here (QMK encourages anyone, even if you aren’t a official contributor to review pull requests) This build was heavily inspired by the Void Ergo S keyboard which was my starting point. I also learn a lot about wiring from Joe Scotto, so thanks so much!

No, this is Victor's project: https://github.com/victorlucachi/void_ergo

More information here: https://www.thingiverse.com/thing:4628137 (see the remix tab with my make for the resources I used). Victor's github here: https://github.com/victorlucachi/void_ergo

Found a handwired split board that was interesting, but seems to not be getting updates (Void Ergo by victorlucachi) and wanted to try it out, I Just had two questions: