Dactyl-It-Yourself-Editor VS redox-keyboard

But I've been building keebs for a few years now, and I gotta cut back :-P The biggest issue is it takes forever to print a shell to 'test fit' it. It would actually be cool if you could print the shells upside down so you don't have to print the whole thing to see how it feels.

Oh! looks like there's a OpenSCAD parametric dactyl now (1) I think this was the clojure one I was playing with before: (2)

1: https://github.com/pseudoku/Dactyl-It-Yourself-Editor

2: https://github.com/l4u/dactyl-manuform-mini-keyboard

Link to Miniwarp https://github.com/pseudoku/Dactyl-It-Yourself-Editor/blob/master/Things/MiniWarp.stl

I used Dactyl-It-Yourself-Editor to create the base model. Further heavily modified in Fusion360.

The original Hypo Warp is all MX based and it is available on github. So you can use that one instead.

Thanks, the board is a MiniWarp by Pseudoku. The stl is in their github repo

Use 3 of those YJ-14015 modules (e.g. https://github.com/mattdibi/redox-keyboard/tree/master/redox-w) with a Pro Micro Q2: Is there a way to generate the PCB for this with ergogen or do I have to wing it in KiCad?

After some initial research, I've found a couple of models that seem to meet my requirements: the Lily58 and Redox-w v2.

There's a website that has a bunch of split keyboard layouts you can print out at full scale and sort of test drive really easily. I did that and found I didn't like the moonlander or ergodox thumb clusters, which is why I went with a Redox instead.

It's just a remix of the original case. Mattdibi also included the STEP and fusion360 file. What I changed on that case: Add a cavity for a 503035 battery, Add a ~3 degrees tilt for the battery and Hex insert for the nuts, making it much easier to assemble / disassemble.

If you want more of a full-size, five-row configuration, get a Redox PCB from Falbatech or Beekeeb.

To anyone who is here in 2 years looking to find a good case the soldered PCB is listed on the official GitHub ( https://github.com/mattdibi/redox-keyboard) as the Redox rev1. 0W. This is the soldered version and is the exact same as the one sold on falba tech and is compatible with the official case found here: https://github.com/Pastitas/Redox-neodox-Case.