Dactyl-It-Yourself-Editor VS rae-dux

But I've been building keebs for a few years now, and I gotta cut back :-P The biggest issue is it takes forever to print a shell to 'test fit' it. It would actually be cool if you could print the shells upside down so you don't have to print the whole thing to see how it feels.

Oh! looks like there's a OpenSCAD parametric dactyl now (1) I think this was the clojure one I was playing with before: (2)

1: https://github.com/pseudoku/Dactyl-It-Yourself-Editor

2: https://github.com/l4u/dactyl-manuform-mini-keyboard

Link to Miniwarp https://github.com/pseudoku/Dactyl-It-Yourself-Editor/blob/master/Things/MiniWarp.stl

I used Dactyl-It-Yourself-Editor to create the base model. Further heavily modified in Fusion360.

The original Hypo Warp is all MX based and it is available on github. So you can use that one instead.

Thanks, the board is a MiniWarp by Pseudoku. The stl is in their github repo

The word I think you're looking for is splay. I haven't seen it done any keywell boards but it's on a few different flat boards like the rae dux. https://github.com/andrewjrae/rae-dux

rae-dux https://github.com/andrewjrae/rae-dux

The layout in the thumbnail is very close to one I just built (not my design), Rae-dux, if you want to save yourself a bunch of time.

2x rae-dux halves (see https://github.com/andrewjrae/rae-dux), more pics available here. $15 AUD for both.

Allow me to indroduce the Owl, yet another 5x3 + 3 keyboard ! This is a modified version of the rae-dux, the layout being the same, except with MX spacing. As for the rae-dux, it is wireless only.

So, purely out of my own needs, and since the Sweep doesn't quite cover that, I'd love a 3W6 or a Roost. Or even a Rae-dux.

Full credit to Andrew Rae for designing this board - https://github.com/andrewjrae/rae-dux

There is samoklava and rae-dux, and you can look through the layouts listed in this comparison tool for more. As for ones with a trackball, the Charybdis and its nano variant come to mind.