DWIN_T5UIC1_LCD VS Ender-3-V2-Neo-Setup

The screen doesn’t work by default unfortunately. There is a workaround to get it working. But I found that the default screen is redundant since I’m controlling everything through my laptop or my phone using the web interface. So I removed the original screen entirely

Klipper supports use of a screen. Even the stock Ender 3 screen can be used.

Original: https://github.com/odwdinc/DWIN_T5UIC1_LCD

For Moonraker: https://github.com/bustedlogic/DWIN_T5UIC1_LCD or this for Octoprint: https://github.com/odwdinc/DWIN_T5UIC1_LCD

if you’re using a rpi to run klipper you can kinda use it, https://github.com/odwdinc/DWIN_T5UIC1_LCD

I saw this project which seems to incorporate all of that by connecting the display directly to the pi, has anyone used this successfully?

i consider myself an intermediate linux/pi/etc user, as i can putz around, follow instructions, and usually fix my mistakes. now, i was curious if, through this method, would it be possible to use the included screen on the piboy and use the integrated controls?

I was looking around for how to get the V2's display working with klipper and Just found this: https://github.com/odwdinc/DWIN_T5UIC1_LCD

It's pretty easy honestly. Following this guide will get you there. I did it somewhat recently and basically stuck with default offsets and have no issues. It does have a guide there to figure them out correctly though.

You can try flashing the professional firmware (follow this guide) and configure Linear Advance.

Flash mriscoc's professional firmware

Follow this and compile your own build of mriscoc's professional firmware. Or upgrade to Klipper.

I agree with the gist of this... before you clog - I used the https://github.com/Lash-L/Ender-3-V2-Neo-Setup/wiki/Updating-Firmware link to upgrade the firmware twice since december. The first time had some challenges around alignment, but the second time was fantastic and got the previews working.

- Flash https://github.com/Lash-L/Ender-3-V2-Neo-Setup/wiki/Updating-Firmware (solve 1000 issues and *ucking chinesse bugs of stock firmware)

There is a new professional firmware by mrisoc that is out. If you have never updated to mriscoc before, here is my guide:https://github.com/Lash-L/Ender-3-V2-Neo-Setup/wiki/Updating-Firmware

I have a bi-metal heatbreak as well and I didn't experience issues like yours. Using this firmware.